url: http://escribe.com/health/thesilverlist/m61388.html
CS>Salt test
From: brianc
Date: Wed, 23 Jul 2003 00:23:27

  > I've seen reference to this but have no idea what it is.

  > What exactly is the salt test and how does one use it?

  Hi Brian,

  Welcome to the Silver List!

  There is  a bit of information on the salt test on my web  page down
  near the bottom

  http://www3.sympatico.ca/add.automation/misc/130vdc.htm

  The salt  test is a very good way to compare two or more  batches of
  cs. The  differences are easy to distinguish. When you use  it  on a
  single sample  of  cs, the results are a bit  subjective,  but still
  quite useful.

  Here is a very rough description of the results at different ppm.

  Less than 10 ppm:

    A very  pale  blue  dispersion, may take  up  to  five  minutes to
    appear. You have to get the lighting just the right way to see it.

  10 ppm:

    Pale blue,  may  take  a minute or so to appear.  Easy  to  see in
    daylight, might  need  a   bit   of   sidelighting  at  night with
    incandescent.

  20 ppm:

    Much stronger response, starts to appear immediately. When looking
    sideways through the glass, you can see little milky  white clouds
    build up. Objects behind the glass are visible after stirring. May
    have a slight blue caste in direct sunlight due to blue content in
    the spectrum.  Dispersion is plainly visible no  matter  where the
    glass is placed.

  30 ppm:

    Fast response, thick white clouds. After stirring,  objects behind
    the glass start to become obscured.

  60 ppm:

    Instant response.  White like skim milk. Objects behind  the glass
    are totally obscured.

Best Regards,

Mike Monett


--
The silver-list is a moderated forum for discussion of colloidal silver.

Instructions for unsubscribing may be found at: http://silverlist.org

To post, address your message to: [email protected]

Silver-list archive: http://escribe.com/health/thesilverlist/index.html

List maintainer: Mike Devour <[email protected]>