> > The big difference is my current setup would be dark yellow by now. > I am still using straight rods for the anode, and a "W" for the > cathode. ## It did go tea colored about two hours after removing power [blackish brown] I was doing the write up immediately after stopping the batch. > > I have noticed a drop in performance lately - maybe it's partly due > to the crud I am letting build up on the anode. Soon I will clean it > off with H2O2 and see if it makes any difference. > > > Salt test: > > Enough salt to leave some undissolved in bottom of a shot glass. > > Turned milky white..but not like skim milk or anything. > > Yes, I would expect a very strong dispersion. Could you see objects > behind the glass? ## Yes > > The big advantage of the lower current density is it needs no > stirring, which would be a heavy drain on a battery and less > suitable for use in remote areas or third world countries where > batteries are expensive. Stirring also adds to the cost, and I am > trying to drive that down to the absolute minimum and still maintain > quality. When you depend on donations, every tenth of a penny > counts. ### Seems that a very small solar cell would do the job. Ode
-- The silver-list is a moderated forum for discussion of colloidal silver. Instructions for unsubscribing may be found at: http://silverlist.org To post, address your message to: [email protected] Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <[email protected]>
