Taken from
http://www.pridelabs.us/cs/ps30.htm
LVDC Colloidal Gold?
The PS30 has been 'experimented' with successfully in making low PPM
(under 5ppm) LVDC naturally charged Colloidal Gold. These experiments
have made clear Colloidal Gold, not the larger particle Reddish or Ruby
colored Gold being sold on the market. Low PPM LVDC Colloidal Gold has
been shown by blind tests to be effective and useful in as little as 1
PPM. LVDC Colloidal Gold takes anywhere from 4 to 16 hours to experiment
with and sometimes can only be pushed to a few PPM above your initial
baseline. The PS30 is NOT guaranteed to make LVDC Colloidal Gold in any
PPM amount, it can only be used to make experimental LVDC Colloidal Gold.
HVAC Add-ON Module: Makes a smaller AC Generated Colloidal Particle, but
all HVAC Modules are for EXPERIMENTAL USE ONLY and PRIDE LABS does not
guaranty your ability to make HVAC, Silver, Gold or Copper.
Does anyone have any detailed procedures for making colloidal gold? I
had heard that Low Voltage didnt work to make CG , and didnt want to put
out the $$ for the hi-voltage module, but am now concidering it.
I use the Pride labs PS-30 and make about a gallon of CS a week.
Brew Cell: Gallon Sun Tea Jar
anode: 5" #14 .9999 silver wire
one inch separation
2 cathodes: 7" #12 .9999 silver wire
air pump bubbler
brew temp: 120 f.
usual brew time 4 - 5 1/2 hrs
--
The silver-list is a moderated forum for discussion of colloidal silver.
Instructions for unsubscribing may be found at: http://silverlist.org
To post, address your message to: silver-list@eskimo.com
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <mdev...@eskimo.com>
