url: http://escribe.com/health/thesilverlist/m63414.html
RE: CS>Measuring ppms
From: Vince Richter
Date: Sat, 11 Oct 2003 20:31:08

  > Hi Mike,  We make CS a variety of different ways,  and  get widely
  > different results. We measure the ppm or don't measure it  to suit
  > ourselves. We  slug  down a mouthful or ten from 0 to  20  or more
  > times a  day,  sometimes  our family  and  friends  want  some and
  > sometimes they  don't.  CS  has helped us  all  in  some  way, and
  > sometimes it  doesn't  help  as much as we want  it  to.  It seems
  > ironic to  me  that  we could get to  the  nitpicking  stage about
  > something as  varied as CS production and measurement.  It reminds
  > me of  the old cliché about measuring with  a  micrometer, marking
  > with a  piece  of  chalk,   and   cutting   with  an  ax.  The PWT
  > manufacturing process  seems to follow high standards.  No process
  > is 100%  perfect.  To  prove beyond a shadow  of  a  doubt  that a
  > process is not 100% perfect is no great accomplishment. I'll stick
  > with my PWT, some will use a salt test, some will use a  TEM, some
  > will use a spectrophotometer, and you'll eventually have  both the
  > PWT and the salt test.

  > What's wrong  with that? Nothing that I can tell.  Of  course, I'm
  > just your average CS user...

  > Just my opinion,

  > Vince

  Hi Vince,

  Yes, I  agree with you completely. Nothing is wrong with that.  As I
  have stated  in previous posts, many people have  benefited  from cs
  made with  the  3   nines   process   and  it's  huge  variations in
  performance. I used it for many years.

  As I  got  older and encountered mold problems,  I  found  my immune
  system was  starting  to   degrade.   Eventually,  most  people will
  discover this also as they age.

  I also discovered that a higher concentration of silver  ions solved
  problems that the 3 nines could not.

  This got me interested in studying the process of making cs. How are
  the oxides  produced?  What are the limits to the  process,  and can
  anything be done to increase them? I started devising experiments to
  learn more  about  these  things, and  posted  the  results  here. I
  learned how  to  obtain  higher ionic ppm  by  reducing  the current
  density, an  approach  that Ken and others  have  discussed numerous
  times. I  learned  how to visualize the ions  in  solution  and have
  measured the  diffusion velocity. I found the Ag+ and OH-  ions have
  about the same velocity, which is contrary to all the  information I
  could find  in the silver archives and on the web. I have  shown how
  to use Mercury to calculate the maximum possible ppm using Bob Lee's
  Faraday calculations. I have posted information on two  cs generator
  designs and how to make a high compliance current source  similar to
  Steve Young's approach. And a few other things.

  Some people are interested, most are not. One or two  people believe
  it, most  don't care. They are quite happy with what they  have, and
  there is nothing wrong with that at all. I would feel the same way.

  But I  think it's important to continue searching for  new knowledge
  about the  process. So in the future, if someone happens to  want to
  find out  more,  the information, methods, and data will  be  in the
  archives.

  But the  experiments must be reproducible and the  measurements must
  correlate. Otherwise it is not worth very much to anyone.

  The quest continues. Meanwhile, I glug my cs the same as you do:)

Best Regards,

Mike Monett


--
The silver-list is a moderated forum for discussion of colloidal silver.

Instructions for unsubscribing may be found at: http://silverlist.org

To post, address your message to: [email protected]

Silver-list archive: http://escribe.com/health/thesilverlist/index.html

List maintainer: Mike Devour <[email protected]>