Mike,
As to what you said at the very end, I feel sure that at some levels I'm
making things more difficult than they should be.  But somewhere there's
method in the madness.  For one thing it just happens that my most
extensive testing with the silver chloride is coming ahead of the
testing with the silver nitrate.  So I'm all excited about the chloride
for the moment, albeit a problem from the aspect Marshall has
introduced, that the silver chloride will slowly desolve.

I've done the chlorides first for the simple reason that it's easiest.
I have a couple of hundred candles on hand, complete with plastic cover
caps, and these contain no form of silver.  I could saturate them with
concentrated CS but we don't have enough of this at the moment.  So an
easy way to apply silver is by saturating with silver nitrate, then
salting with sodium chloride.  I'm not doing the testing of the silver
nitrate first because this involves all the prior steps of ceramics:
the mixing of various compositions, forming candles, drying, firing,
etc.  And if starting with silver from the beginning one really has to
do batches in big lots, over long periods.  So while I am working on
what is effective for big lots too, I'd also like to be able to just
pick up the odd purifiers, unsaturated ones off the shelf, and have a
way of applying the silver to these.

Another layer of confusion entered in when I realized that we may need
higher concentrations of silver than had previously been considered,
when more hopeful of concentrated CS.  This new understanding was
coupled with another recent realization, that the silver could be mixed
directly into the clay composition. Until recently, on an A.T. basis
(cottage industry) no one had tried this.  So now other forms of silver
became more attractive. I think ours may just be among the first forrays
into use of the chlorides and nitrates.  whether or not that distinction
is eloquent or dubious may be another matter.

Meanwhile it's great to realize I can get help right here, and without
this I'd probably be stumbling a bit more than I already am.  Hopefully
we're going somewhere, and I'll do my best to let you know what does and
does not appear to be workable.  For a long time we had few purifiers on
hand, but fortunately we now have hundreds, and lots more coming.  So
it's just a question of getting the silver steps correct.
Reid




Mike Devour said:
Hi Reid,

Am I missing something, or are we still talking about saturating the
ceramic filter candles with *something* and then low firing them?

Just about whatever you saturate with, won't heating it up drive off
the nitrate/chloride/oxide and the water and leave silver metal
embedded throughout the matrix? I suppose the silver may oxidize or
complex with something in the ceramic, but not anything that'd have
much solubility, I'd expect...

Also, I wonder if you ever tried saturating the dry green clay with CS
or some concentration of the nitrate or chloride and put *that* through
the kiln for the initial bisque firing? Did it work or not?

I guess I'm not conscious of all the considerations you're juggling,
but it seems the job is a lot harder than it ought to be.

Be well,

Mike D.



--
The silver-list is a moderated forum for discussion of colloidal silver.

Instructions for unsubscribing may be found at: http://silverlist.org

To post, address your message to: [email protected]

Silver-list archive: http://escribe.com/health/thesilverlist/index.html

List maintainer: Mike Devour <[email protected]>