In a message dated 07/07/2005 15:46:10 GMT Daylight Time, 
[email protected] writes:

sorry but Brents  is NOT  an ultrasonic cs maker at all.

if u read the site carefully.

the ultrasonic pulses are used to improve mixing and lower surface tension of 
the water.

i.e its not ultrasonic caviation at all............


<< Subj:     Re: CS>NEW METHOD FOR MAKING NON IONIC COLLOIDAL SILVER---
 Date:  07/07/2005 15:46:10 GMT Daylight Time
 From:  [email protected] (Ode Coyote)
 Reply-to:  <A HREF="mailto:[email protected]";>[email protected]</A>
 To:    [email protected]
 
 
 http://www.colloidalsilvergens.com/colloidal_silver_generator_store.htm
 
 'Brents' ultrasonic CS generator...previous pic showed deep yellow CS and
 was changed sometime last year.
  I think he added an air bubbler as well. [maybe that's why?]
 
 Ode
 
 
 At 04:02 AM 7/7/2005 EDT, you wrote:
 >
 >This is my idea entirely.
 >
 >use ultrasonic cavitation to make colloidal silver which is made of silver 
 >particles instead of ionic colloidal silver using electric current.
 >
 >an ultrasonic jewellery cleaning device can be used and costs about $100.
 >a silver sheet or wire would be immersed in water and the device switched 
on.
 >
 >ultrasonic cleaning is well researched.
 >look in google.
 >
 >the frequency can be adjuted to control the size of silver paticles.....or 
 >the power level.....
 >
 >the tank or container can be made of an inert plastic.
 >
 >remember maximum cavitation will occur near the ultrasonic transducer and 
so 
 >the silver wire/silver plate can be put next to the transducer immersed in 
 >water.
 >
 >the walls of the container will be much further away and as the power falls 
 >off very rapidly with distance from the ultrasonic transducer therefore
 minimal 
 >erosion of the container will occur.
 >
 >Also in a brilliant innovative twist the container can be made of pure
 silver 
 >or coated with pure silver.....
 >
 >the fineness of silver particles depends on the power level of the
 transducer 
 >and the distance from the ultrasonic transducer.
 >further the ultrasonic from 15 khz to 70 khz fequency will also have an 
 >effect. generally higher frequencies and lower powers will produce finer 
and 
 >smaller particles due to cavitation/abrasion by the liquid into which the
 metal is 
 >immersed.(water)
 >
 >i should point out no one has as far my research can tell in google has 
ever 
 >attempted to make non-ionic colloidal silver by this method.
 >
 >I understand meso silver is made by vacuum evaporation and deposition and 
is 
 >complex and expensive although particle size is very small.
 >
 >I urge you and others to experiment using ultrasonic methods.An ultrasonic 
 >jewellery cleaner can be purchased for about $100.
 >a second hand one for even less and will last a long time.
 >
 >no doubt you could even patent the process and become rich and throw a few 
 >breadcrumbs this way too.
 > >>


--
The Silver List is a moderated forum for discussing Colloidal Silver.

Instructions for unsubscribing are posted at: http://silverlist.org

To post, address your message to: [email protected]
Silver List archive: http://escribe.com/health/thesilverlist/index.html

Address Off-Topic messages to: [email protected]
OT Archive: http://escribe.com/health/silverofftopiclist/index.html

List maintainer: Mike Devour <[email protected]>