http://www.caswellplating.com/kits/plugnplate.htm Do not know how well it works, but have been thinking about getting it. I have a sensor on bottom of my boat that is silver plated (reads current on aluminum hull). The sensor and boat is 32 years old and needs redone. I hung 4 ft of my silver wire over side and got different reading than the sensor. Bob
-----Original Message----- From: silver-list-requ...@eskimo.com [mailto:silver-list-requ...@eskimo.com] On Behalf Of V Sent: Saturday, March 25, 2006 8:26 PM To: Max Sanders Subject: Re: CS>Plating small things Hi Max, there is a way to plate things just using a chemical Take care, V > I would like to plate some small items with silver. Can our EIS > system, or some simple variation be used to apply a very thin coating? > I believe industrial plating solutions use an acid bath, but that is > about all I know. Since this is limited use, I don't need great speed > and quantity of items. > note: I am still considering, or rather interested, in the cast iron > plating concept.....but this is not that. > Maz > Acmeair <res00...@verizon.net> wrote: doing the vitc/salt protocol, > can you use potassium instead of salt? > need a good source of vit c, potassium, > thanks, jim > -- > The Silver List is a moderated forum for discussing Colloidal Silver. > Instructions for unsubscribing are posted at: http://silverlist.org > To post, address your message to: silver-list@eskimo.com > Address Off-Topic messages to: silver-off-topic-l...@eskimo.com > The Silver List and Off Topic List archives are currently down... > List maintainer: Mike Devour > > > --------------------------------- > New Yahoo! Messenger with Voice. Call regular phones from your PC and save big. --
