I will very much appreciate a schematic. Thank you for the work and care.
Jim -----Original Message----- From: parj...@bellsouth.net [mailto:parj...@bellsouth.net] Sent: Monday, June 12, 2006 7:30 AM To: silver-list@eskimo.com Subject: CS>Re: Re: CS>Making CS Hi Steve Please send me a copy of your schematic, I would very much appreciate it. Many thanks Jacques > > From: "S&JY" <youngst...@konnections.net> > Date: 2006/05/25 Thu AM 12:18:21 EDT > To: <silver-list@eskimo.com> > CC: <jbfr...@adelphia.net> > Subject: Re: CS>Making CS > > Joseph, > > My homemade generator uses a quart mason jar, with #12 vertically > mounted silver wires spaced about 2 inches apart whose ends are about > 3/4 of an inch from the bottom. I use a constant current of about 200 > microamps and let it brew for 24 hours. The very low current produces > very fine particles and doesn't require mechanical or thermal stirring > (the Brownian motion provides sufficient "stirring"). I don't use > polarity switching, but I do swap the wires every batch so they wear > out evenly. Be sure to use only steam distilled water. > > If you are handy with electronics, I can send you a schematic of the > constant current supply I use. The parts cost around $15. Or, you > can simply buy a constant current diode from Mouser Electronics and > put it in series with a 24 volt DC wall transformer available from > Radio Shack or Jameco or many other sources. > > --Steve Y. > > ----- Original Message ----- > From: "Joseph Fritz" <jbfr...@adelphia.net> > To: <silver-list@eskimo.com> > Sent: Wednesday, May 24, 2006 7:52 PM > Subject: CS>Making CS > > > Hi everyone. It's been a while since I've made CS and have > lost/misplaced most of what I was using to make CS. I plan on building > a new generator. And was wondering what the current consensus on > making CS is. I am going to get new wire for making CS I will be > making it in a mason jar Any recommendations on what length > cathode/electrode for jar size? I will be using 12 gauge silver wire. > What size batch? 16, 32, 64OZ Should I use polarity switching? Should > I also have an on/off cycle? What voltage/current? I would look in the > archives but they disappeared Any idea if/when they will return? Also > if this info is on a web page somewhere could you please point me to > it? Thank you! Sincerely Joseph Fritz > > > > > -- > The Silver List is a moderated forum for discussing Colloidal Silver. > > Instructions for unsubscribing are posted at: http://silverlist.org > > To post, address your message to: silver-list@eskimo.com > > Address Off-Topic messages to: silver-off-topic-l...@eskimo.com > > The Silver List and Off Topic List archives are currently down... > > List maintainer: Mike Devour <mdev...@eskimo.com> > > >