Dear Awei, Please use the following command after building Flexus (e.g., "make UP.Trace").
$SIMICS/scripts/start-simics -no-module-cache \ -P modelbuilder -sign-module \ $FLEXUS_ROOT/simulators/UP.Trace/libflexus_UP.Trace_v9_iface_gcc.so Substitute your path to simics for $SIMICS and the flexus root directory for $FLEXUS_ROOT. Regards, Pejman ________________________________________ From: w x [[email protected]] Sent: Wednesday, June 29, 2011 2:31 PM To: [email protected] Subject: Simics Model Builder License Error in Flexus Hi, I am trying to run the FLEXUS 4.0 Test application but unable to run due to the following error when executing the step : run_job \ -postprocess "SCRIPTS_ROOT/postprocess_ckptgen.sh flexpoint 24 test_app" \ -cfg trace -run flexpoint -local -ckpt-gen UP.Trace flexus_test_app_x86 ================================================================================== *** builder: Failed to checkout feature For further information, refer to the FLEXlm End User Manual, available at "www.macrovision.com<http://www.macrovision.com>". Error loading module 'flexus-UP.Trace-x86-iface-gcc': License Error: module not signed. Module 'flexus-UP.Trace-x86-iface-gcc' not loaded. Simics Model Builder license needed to sign modules. [start.simics:5] the command did not complete properly; interrupting script ERROR: Invalid return code from Simics: 1 </opt/flexus-4.0/result/basedir/trace-UP.Trace-28Jun11-220056/flexus_test_app_x86/000_000
