What error? What versipn of simh? Op ma 15 feb. 2016 om 20:53 schreef Bill Cunningham <bill...@suddenlink.net>
> > > ----- Original Message ----- > *From:* Wilm Boerhout <wboerh...@gmail.com> > *To:* simh@trailing-edge.com > *Sent:* Monday, February 15, 2016 3:42 AM > *Subject:* Re: [Simh] vax simh and loading file > > Exactly. The only thing that simh adds to this process is the "set cr > reset" command to prompt the card reader (driver?). > > So on simh, the flow control would be: > > 1. get your "card deck" in a file on the host > 2. boot simh with the cr device attached to said file > 3. boot your VAX > 4. log in, then CTRL/E out to the simh prompt, and issue "set cr reset" > 5. issue "continue" to the simh prompt to resume the VAX > 6. observe that your job has run, and the file (if not deleted, which > is the default) is now a DCL file in your default login directory, > default name is "INPBATCH.COM". Name may be overridden by the /NAME > qualifier on the job card. > > /Wilm > > > OK here's what I tried. Issuing "continue" in simg doesn't work. simh> > "continue" just gives an error. > > ./vax > lo -r ka655x.bin > set cpu 64m > set cpu idle=vms > set rq0 ra92 > at rq0 vms > at nvr r > set cr autoeof > at -a cr list "name of licnese PAKs > set cr translation=029 > b cpu > Then I use "b dua0" no problems > login as system and enter password. No problems > ^E > simh> > here I enter "set cr reset" > and at simh> > I enter "continue" and get an error. <shrug> > > Bill > > >
_______________________________________________ Simh mailing list Simh@trailing-edge.com http://mailman.trailing-edge.com/mailman/listinfo/simh