Good that it works. Do you know what the problem was in detail? Also - with
regard to cpu load. Have you told simh to idle when the simulation does?
And for Paul. Is rsts using the wait instruction to idle?
Johnny
Bryan Davies <[email protected]> skrev: (23 januari 2018 10:32:31 CET)
>It works! Many thanks to all who have assisted.
>
>I installed the changed .ini file and sure enough I now get past the
>startup prompts.
>
>Paul - I have kept the modded Init.sys on standby but haven't installed
>it.
>
>My only comment is that Simh seems to be very heavy on CPU. The
>Raspberry
>Pi seems to be maxed out when running it - even when the simulated OS
>isn't
>'doing' anything. But it is nevertheless good enough for display
>purposes. I will be installing it at
>http://www.computinghistory.org.uk/
>tomorrow and the PC / Smartphone generation will be able to see how
>computing was in the 'olden days'.
>
>
>Regards to all,
>
>Bryan.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>On 22 January 2018 at 20:01, Paul Koning <[email protected]>
>wrote:
>
>>
>>
>> On Jan 22, 2018, at 2:53 PM, Mark Pizzolato <[email protected]>
>wrote:
>>
>> The attached pdp11_exp.ini should work, and be simpler to understand.
>>
>>
>> Thanks Mark.
>>
>> Just to correct a mistake in my earlier note to the list: I mixed up
>a
>> modified version of RSTS V10.1 sources with the original. I thought
>that
>> the changes for Pro support were in the official one -- the answer
>yes
>> "only in part". The change to add a timeout on the "start
>timesharing"
>> prompt was one I added as part of Pro support but that didn't make it
>into
>> the official release.
>>
>> So you're stuck with an "expect" based solution, unless you want to
>use a
>> modified init.sys. I can supply that to anyone who's interested.
>>
>> paul
>>
>>
>>
--
Skickat från min Android-enhet med K-9 Mail. Ursäkta min fåordighet.
_______________________________________________
Simh mailing list
[email protected]
http://mailman.trailing-edge.com/mailman/listinfo/simh
