I run under linux but I am installing the mingw stuff on a win 7 cm I will update soon
On Wed, Jan 9, 2019, 12:43 PM Bill Beech (NJ7P) <[email protected]> wrote: > Gene, > > Sorry you are having problems with this. > > My code is still very beta and sometimes it will work. The version of the > system you show running is an old version for me, but not for the GitHub > repository. > > I am trying to figure out what you are doing, so some questions: > > Are you using my support files from my web site? > > Are you using MinGW for building? > > Thanks! > > Nill > On 1/9/2019 11:04 AM, Gene Irwin wrote: > > I'm trying to get the isys80x0 series to use the floppy disk controllers, > but no matter what I try to do in the SCP as far as enabling or disabling > the SBC20x or ZX200A, the mon80 (a or b) always says "No Disk Controller > Present" when I issue the FB command. > > I'm probably missing something like a port output command, or a complie > time setting, or something. > > When I start the emulator I get: > > ----------------- > $ isys8010 > Initializing iSBC-80/10 SBC > Onboard Devices: > 8080: Reset > 8251-0: Hardware Reset > 8251-0: Registered at 00EC > Port 00EC is assigned to dev 0000 > Port 00ED is assigned to dev 0000 > 8251-0: Software Reset > 8255-0: Reset > 8255-0: Registered at 00E4 > Port 00E4 is assigned to dev 0000 > Port 00E5 is assigned to dev 0000 > Port 00E6 is assigned to dev 0000 > Port 00E7 is assigned to dev 0000 > 8255-1: Reset > 8255-1: Registered at 00E8 > Port 00E8 is assigned to dev 0001 > Port 00E9 is assigned to dev 0001 > Port 00EA is assigned to dev 0001 > Port 00EB is assigned to dev 0001 > EPROM: Configured, Not attached > Multibus: Reset > iSBC-201 FDC Board - Not Found > iSBC-202 FDC Board - Found > isbc202-0: Hardware Reset > isbc202-0: Registered at 0078 > Port 0078 is assigned to dev 0000 > Port 0079 is assigned to dev 0000 > Port 007A is assigned to dev 0000 > Port 007B is assigned to dev 0000 > Port 007F is assigned to dev 0000 > isbc202-0: Software Reset > SBC2020: Configured, Status=19 Attached to (null) > SBC2021: Configured, Status=1B Attached to (null) > SBC2022: Configured, Status=3B Attached to (null) > SBC2023: Configured, Status=7B Attached to (null) > isbc202-0: Software Reset > SBC2020: Configured, Status=19 Attached to (null) > SBC2021: Configured, Status=1B Attached to (null) > SBC2022: Configured, Status=3B Attached to (null) > SBC2023: Configured, Status=7B Attached to (null) > ZX-200A FDC Board - Not Found > > Intel System 80/10 simulator V4.0-0 Current git commit id: 584147fb > sim> > ----------------------------------- > But devices are all disabled: > ----------------------------------- > sim> sh de > Intel System 80/10 simulator configuration > > I8080 > EPROM > RAM > I8251 > I8255 2 units > MBIRQ > SBC064 disabled > SBC201 disabled > SBC202 disabled > ZX200A disabled > sim> > --------------------------------------------------- > > and if I enable or disable any of the 3 devices and issue a reset command, > I get the same output as the initial status display, nothing changes. > > what am I doing wrong? > > I'm trying to use Bill Beech's config files, disk images and rom images to > boot CP/M on these devices but I can't find any documentation that will > clear up any of the issues I am having. > > Thanks for looking into this . . . > > _______________________________________________ > Simh mailing > [email protected]http://mailman.trailing-edge.com/mailman/listinfo/simh > > _______________________________________________ > Simh mailing list > [email protected] > http://mailman.trailing-edge.com/mailman/listinfo/simh
_______________________________________________ Simh mailing list [email protected] http://mailman.trailing-edge.com/mailman/listinfo/simh
