hi Shashi,

I have looked into the rule, and it looks OK to me. There are few things,
though, which might need additional inspection. Firstly, is this rule
appearing in a configuration file with other rules? If so, please check if
there are any preceding rules which could accidentally match events that
are meant to be matched by your current rule. I have run into similar
issues in the past -- for example, if your rule file begins with the rule

type=single
ptype=regexp
pattern=.
desc=log all events if MYCONTEXT is present
context=MYCONTEXT
action=logonly

and the context MYCONTEXT gets created when you don't expect it, the above
rule will not pass any events to following rules. If MYCONTEXT will
disappear after 4 hours, the next %BGP-5-ADJCHANGE event will match the
PairWithWindow rule, and trigger the alarm which appears 4 hours after the
first BGP-5-ADJCHANGE instance. In my own configurations I have few times
run into more subtle side effects which have been somewhat harder to
notice. So apart from the rule itself, please also look into the preceding
rules for any possible caveats.

kind regards,
risto



2015-08-25 2:11 GMT+03:00 Ganji, Shashirekha Yadav <[email protected]>:

> Hi,
>
>
>
> I’am using SEC in our infrastructure past 2 years and our customers are
> extremely happy with the tool.It was all good so far but yesterday
> experienced a peculiar issue.
>
>
>
> We have SEC rule setup as below:
>
>
>
> ## Rule:2
>
> ## Last Updated At: 2015-03-19T17:39:21.297Z
>
> ## Rule:1 Vendor:Cisco BGP neighbor down alarm, alarm will be suppressed
> if neighbor recovers within 60 seconds. In case of 5 such events witin 5
> min a %BGP-5-FLAP: notification will be generated.
>
> type=pairWithWindow
>
> ptype=regexp
>
> continue=dontcont
>
> pattern=Date=.* ,Device=(\S+) ,Msg=.*((%BGP-5-ADJCHANGE:).*
> (\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}) Down.*)
>
> desc=$1 $3 $4
>
> action=shellcmd perl /etc/syslog-config/send2mom/sec_s2m_v2.pl
> --targetparent $1 --target $4 --notifying_group NETRS --severity MAJOR
> --kpi Network --pattern "$3" --log "$2" --source SEC --sendevent on
>
> ptype2=regexp
>
> pattern2=Date=.* ,Device=($1) ,Msg=.*(($3).* ($4) Up.*)
>
> desc2=$1 BGP Neighbor $4 flap detected
>
> action2=event %s; shellcmd echo `date` "Source=SEC, KpiName=Network,
> Severity=-, Action=Suppress, Device=$1, Pattern=$3, Notify Group=-, Log $0"
> >> /local/mnt/workspace/logs/sec-logs/sec-messages.log
>
> window=60
>
>
>
>
>
> I noticed there were 2 events matching the above pattern.Device A and
> Device B connected to each other and both the devices BGP nei connecting to
> each other was down.
>
>
>
> Problem was SEC alerted the above alerts with a delay of 4 hrs,Can you
> explain why is this delay and how can i fix the issue.
>
>
>
> Thanks,
>
> shashi
>
>
>
>
> ------------------------------------------------------------------------------
>
> _______________________________________________
> Simple-evcorr-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/simple-evcorr-users
>
>
------------------------------------------------------------------------------
_______________________________________________
Simple-evcorr-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/simple-evcorr-users

Reply via email to