Here is the scoop:
I am trying to set up a secondary mail server for multiple domains, but do
not want an open relay. I had it workging with an old computer, but I can't
get it going with this one.
I was hoping someone could help debug the router entries I use as well as
the settings to apply to the SMTP module.
I am handling three domains (working fine on my main SIMS box):
kohrt.net
waushakumpond.org
manuex.com
My current config:
Running SIMS 18b9d14 on an 'old' PowerTower Pro with OS 9.2
Internet Domain Name (in General control dialog)
kohrt.net
Router (as per FAQ at http://www.laffeycomputer.com/SIMS/):
power.kohrt.net=kohrt.net
mail.manuex.com=manuex.com
manuex.com=manuex.com.smtp
kohrt.net=kohrt.net.smtp
waushakumpond.org=waushakumpond.org.smtp
SMTP settings (via communigator)
SENDING:
25 TCP Channels Direct to recipients
30 min between retries
250 retries max
RECEIVE:
25 TCP channels
0 AppleTalk channels
5 channels per host, max
30 seconds for a login to be considered a client
Advertise AUTH - YES
Allow ETRN - YES
ANTI-SPAM:
Relay For Clients Only - YES
(My three IP addresses are listed in the Client list)
Verify Return Path - YES
Use Blanklist DNS Server - NO
When I had "Relay For Clients Only - NO", the logs showed spammers using my
system. Since "Relay For Clients Only - YES", I mostly see
13:21:01 3 SYSTEM WaitNextEvent: too long(653 ticks)
(I am running Outlook Express on the same comuter much of the time...)
Finally, Apple's listserver tried to use my secondary, and got booted!
Log follows:
16:57:10
4 SMTP(tcp) Connection request from [17.254.0.82:37323],seq=2, 2/3
4 SMTP Line 3 created for answering
4 SMTP-003() Got connection from [17.254.0.82:37323]
4 SMTP(tcp) Connection accepted from [17.254.0.82:37323], seq=2, 2/3
4 SMTP-003([17.254.0.82]) Sending 220-kohrt.net Stalker Internet Mail
Server V.1.8b9d14 is ready.\r\n220 ESMTP is spoken here. You are welcome\r\n
4 SMTP-003([17.254.0.82]) Input Line: EHLO bz2.apple.com\r
4 SMTP-003(bz2.apple.com) Looking for bz2.apple.com
4 SMTP-003(bz2.apple.com) Sending 250-kohrt.net is pleased to meet
you\r\n250-HELP\r\n250-ETRN\r\n250-AUTH=LOGIN\r\n250-AUTH LOGIN PLAIN
CRAM-MD5\r\n250 EHLO\r\n
16:57:11
4 SMTP-003(bz2.apple.com) Input Line: MAIL From:<[EMAIL PROTECTED]>\r
4 SMTP-003(bz2.apple.com) Sending 250 <[EMAIL PROTECTED]> sender
accepted\r\n
4 SMTP-003(bz2.apple.com) Input Line: RCPT To:<[EMAIL PROTECTED]>\r
16:57:12
1 SMTP-003(bz2.apple.com) SPAM? Recipient '<[EMAIL PROTECTED]>'
rejected: user unknown
4 SMTP-003(bz2.apple.com) Sending 550 <[EMAIL PROTECTED]> user
unknown.\r\n
4 SMTP-003(bz2.apple.com) Input Line: RSET\r
4 SMTP-003(bz2.apple.com) Sending 250 SMTP state reset\r\n
4 SMTP-003(bz2.apple.com) Input Line: QUIT\r
4 SMTP-003(bz2.apple.com) Sending 221 kohrt.net closing connection\r\n
4 SMTP-003(bz2.apple.com) Closing
4 SMTP-003(bz2.apple.com) Input Stream ended
4 SMTP disposing line 3
So what am I doing wrong?
Thanks
--Kevin
#############################################################
This message is sent to you because you are subscribed to
the mailing list <[EMAIL PROTECTED]>.
To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]>
Send administrative queries to <[EMAIL PROTECTED]>
