Hi Paul,
On Thu, Apr 21, 2022 at 08:17:50PM -0000, [email protected] wrote:
> @ubuntu:~$ sudo osmo-remsim-server
> 35014 DLINP NOTICE input/ipa.c:283 0.0.0.0:9998 accept()ed new link from
> 127.0.0.1:36289
> 35087 DSLOTMAP INFO ../slotmap.c:135 Slot Map B(1:0) <-> C(1:0) added
> 35087 DMAIN INFO rest_api.c:333 Slot Map B(1:0) <-> C(1:0) state change: NEW
> -> NEW
> 35087 DMAIN INFO rest_api.c:339 Slot Map B(1:0) <-> C(1:0) state change: NEW
> -> NEW
> 35014 DMAIN INFO rspro_server.c:716 Event FD arrived, checking for any
> pending work
> 35014 DMAIN INFO rspro_server.c:391 Slot Map B(1:0) <-> C(1:0) state change:
> NEW -> UNACKNOWLEDGED
> 35014 DMAIN INFO rspro_server.c:363 Slot Map B(1:0) <-> C(1:0) state change:
> UNACKNOWLEDGED -> ACTIVE
this looks good.
> 35019 DBANKDW INFO bankd_main.c:442 [000 CONN_WAIT_ID] Changing state to
> ACCEPTING
> 35018 DSLOTMAP INFO ../slotmap.c:135 Slot Map B(1:0) <-> C(1:0) added
this looks also good.
> 35019 DBANKDW INFO bankd_main.c:955 [000 ACCEPTING] Accepted connection from
> 192.168.70.218:41431
> 35019 DBANKDW INFO bankd_main.c:442 [000 ACCEPTING] Changing state to
> CONN_WAIT_ID
> 35019 DBANKDW INFO bankd_main.c:655 [000 CONN_WAIT_ID] Rx RSPRO
> connectClientReq(T=0, N='raspberrypi', SW='remsim-client', VER='1.0.0')
> 35019 DBANKDW INFO bankd_main.c:442 [000 CONN_WAIT_ID] Changing state to
> CONN_CLIENT
> 35019 DBANKDW INFO bankd_main.c:625 [000 CONN_CLIENT] slotmap found: C(1:0)
> -> B(1:0)
> 35019 DBANKDW INFO bankd_main.c:450 [000 CONN_CLIENT] Changing state to
> CONN_CLIENT_MAPPED (timeout=10)
also good.
> 35019 DBANKDW INFO bankd_pcsc.c:261 [000 CONN_CLIENT_MAPPED] Attempting to
> open PC/SC context
> 35019 DBANKDW INFO bankd_pcsc.c:264 [000 CONN_CLIENT_MAPPED]
> SCardEstablishContext: OK
> 35019 DBANKDW INFO bankd_pcsc.c:215 [000 CONN_CLIENT_MAPPED] Attempting to
> find card/slot using regex 'OMNIKEY AG CardMan 3121
> \(OKCM0012007091219038212815383974\) 00 00'
> 35019 DBANKDW INFO bankd_pcsc.c:234 [000 CONN_CLIENT_MAPPED] Attempting to
> open card/slot 'OMNIKEY AG CardMan 3121 (OKCM0012007091219038212815383974) 00
> 00'
> 35019 DBANKDW INFO bankd_pcsc.c:198 [000 CONN_CLIENT_MAPPED] SCardStatus: OK
> 35019 DBANKDW INFO bankd_pcsc.c:200 [000 CONN_CLIENT_MAPPED] Card ATR:
> 3b9f96c00a3fc7828031e073fe211f65d00209146c810f13
> 35019 DBANKDW INFO bankd_main.c:442 [000 CONN_CLIENT_MAPPED] Changing state
> to CONN_CLIENT_MAPPED_CARD
fine.
> On the RPi running the client I get:
> pi@raspberrypi:~ $ sudo osmo-remsim-client-st2 --usb-vendor 1d50
> --usb-product 60e3 --usb-path 1-1.3 --usb-interface 0 --usb-config 1
> --usb-altsetting 0 --client-id 1 --client-slot 0 --server-ip 192.168.70.241
> --server-port 9999
your remsim-server is running on port 9998 above, but you're configuring
remsim-client to connect to port
9999. I'm not sure about the IP addresses in your setup..
> DRSPRO INFO ../rspro_client_fsm.c:307 RSPRO_CLIENT(server){REESTABLISH}:
> Creating TCP connection to server at 192.168.70.241:9999
> DLINP NOTICE simtrace2_api.c:271 [0] <=
> osmo_st2_cardem_request_config(features=00000001)
> DLINP NOTICE input/ipa.c:128 192.168.70.241:9999 connection done
> DRSPRO NOTICE ../rspro_client_fsm.c:127 RSPRO_CLIENT(server){REESTABLISH}:
> RSPRO link to 192.168.70.241:9999 UP
> DRSPRO ERROR remsim_client.c:121 RSPRO_CLIENT(server){CONNECTED}:
> Unknown/Unsupported RSPRO PDU type: setAtrReq
This is because setAtrReq is permitted on the communication between
bankd and client, and not on the connection between server and client.
So you appear to have established the _control_ connection (between
client and server) to the bankd instead of the server.
The control connection between client and server will then, depending on
the current mappings configured, instruct the client to connect to the
bankd.
Admittedly, the error hadnling could be improved in this scenario. It's
just so "odd" to me that I had never thought of this ever occurring in
the first place :/
Regards,
Harald
--
- Harald Welte <[email protected]> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
