The root cause here looks like this message: [000 CONN_CLIENT] No slotmap (yet) for client C(1:1)
When you did the mapping, did the server or banks list any errors? I get errors if I have previous mappings and I try to reapply them without explicitly deleting the old mappings first. On Mon, Jul 17, 2023 at 12:16 PM <[email protected]> wrote: > > First of all thank you for your reply! > My operation may be slightly different from yours. > Because I put bankd. server. client-st2 is installed in three linux > respectively. bankd and server are linux simulated by vm, and client-st2 is > installed separately on a linux host > debian@debian:/bin$ su > 密码： > root@debian:/bin# pcsc_scan > Using reader plug'n play mechanism > Scanning present readers... > 0: HID Global OMNIKEY 6121 Smart Card Reader [OMNIKEY 6121 Smart Card Reader] > 00 00 > > Mon Jul 17 16:43:49 2023 > Reader 0: HID Global OMNIKEY 6121 Smart Card Reader [OMNIKEY 6121 Smart Card > Reader] 00 00 > Event number: 0 > Card state: Card inserted, > ATR: 3B 9C 95 80 1F C7 80 31 E0 73 FE 21 13 64 10 C0 C0 0F C4 > > ATR: 3B 9C 95 80 1F C7 80 31 E0 73 FE 21 13 64 10 C0 C0 0F C4 > + TS = 3B --> Direct Convention > + T0 = 9C, Y(1): 1001, K: 12 (historical bytes) > TA(1) = 95 --> Fi=512, Di=16, 32 cycles/ETU > 125000 bits/s at 4 MHz, fMax for Fi = 5 MHz => 156250 bits/s > TD(1) = 80 --> Y(i+1) = 1000, Protocol T = 0 > ----- > TD(2) = 1F --> Y(i+1) = 0001, Protocol T = 15 - Global interface bytes > following > ----- > TA(3) = C7 --> Clock stop: no preference - Class accepted by the card: (3G) > A 5V B 3V C 1.8V > + Historical bytes: 80 31 E0 73 FE 21 13 64 10 C0 C0 0F > Category indicator byte: 80 (compact TLV data object) > Tag: 3, len: 1 (card service data byte) > Card service data byte: E0 > - Application selection: by full DF name > - Application selection: by partial DF name > - BER-TLV data objects available in EF.DIR > - EF.DIR and EF.ATR access services: by GET RECORD(s) command > - Card with MF > Tag: 7, len: 3 (card capabilities) > Selection methods: FE > - DF selection by full DF name > - DF selection by partial DF name > - DF selection by path > - DF selection by file identifier > - Implicit DF selection > - Short EF identifier supported > - Record number supported > Data coding byte: 21 > - Behaviour of write functions: proprietary > - Value 'FF' for the first byte of BER-TLV tag fields: invalid > - Data unit in quartets: 2 > Command chaining, length fields and logical channels: 13 > - Logical channel number assignment: by the card > - Maximum number of logical channels: 4 > Tag: 6, len: 4 (pre-issuing data) > Data: 10 C0 C0 0F > + TCK = C4 (correct checksum) > > Possibly identified card (using /root/.cache/smartcard_list.txt): > NONE > > Updating /root/.cache/smartcard_list.txt using > http://ludovic.rousseau.free.fr/softwares/pcsc-tools/smartcard_list.txt > This is the data from the reader part of my bankd side. > On the bank side, I set it like this: osmo-emsim-band -i 192.168.2.128 -b 1 > -n 1 > debian@debian:/usr/bin$ su > 密码： > root@debian:/usr/bin# osmo-remsim-bankd -i 192.168.2.128 -b 1 -n 1 > 3511 DMAIN INFO bankd_pcsc.c:105 PC/SC slot name: 1/0 -> regex 'HID Global > OMNIKEY 6121 Smart Card Reader \[OMNIKEY 6121 Smart Card Reader\] 00 00' > 3511 DRSPRO INFO ../rspro_client_fsm.c:307 RSPRO_CLIENT(server){REESTABLISH}: > Creating TCP connection to server at 192.168.2.128:9998 > 3512 DBANKDW INFO bankd_main.c:442 [000 INIT] Changing state to INIT > 3512 DBANKDW INFO bankd_main.c:442 [000 INIT] Changing state to ACCEPTING > 3511 DLINP NOTICE input/ipa.c:141 192.168.2.128:9998 connection done > 3511 DRSPRO NOTICE ../rspro_client_fsm.c:127 > RSPRO_CLIENT(server){REESTABLISH}: RSPRO link to 192.168.2.128:9998 UP > Then I started to configure another client on linux. I linked simtrace2 to > this host before configuring, and linked simtrace2 to the mobile phone > through fpc. The phone is turned off. > root@openstick:~# lsusb > Bus 001 Device 003: ID 1d50:60e3 OpenMoko, Inc. Osmocom SIMtrace 2 > Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > root@openstick:~# osmo-remsim-client-st2 --usb-vendor 1d50 --usb-product 60e3 > --usb-interface 0 --usb-altsetting 0 --usb-address 3 --usb-path 1-1.1 > --usb-config 1 --client-id 1 --client-slot 1 --server-ip 192.168.2.128 > --server-port 9998 > DRSPRO INFO ../rspro_client_fsm.c:307 RSPRO_CLIENT(server){REESTABLISH}: > Creating TCP connection to server at 192.168.2.128:9998 > DLINP NOTICE simtrace2_api.c:271 [0] <= > osmo_st2_cardem_request_config(features=00000001) > DLINP NOTICE input/ipa.c:141 192.168.2.128:9998 connection done > DRSPRO NOTICE ../rspro_client_fsm.c:127 RSPRO_CLIENT(server){REESTABLISH}: > RSPRO link to 192.168.2.128:9998 UP > then i turn on the phone > DST2 ERROR user_simtrace2.c:152 unknown simtrace msg type 0x00 > DST2 ERROR user_simtrace2.c:152 unknown simtrace msg type 0x00 > DST2 ERROR user_simtrace2.c:152 unknown simtrace msg type 0x00 > DST2 ERROR user_simtrace2.c:152 unknown simtrace msg type 0x00 > DST2 ERROR user_simtrace2.c:152 unknown simtrace msg type 0x00 > DST2 ERROR user_simtrace2.c:152 unknown simtrace msg type 0x00 > DST2 ERROR user_simtrace2.c:152 unknown simtrace msg type 0x00 > DST2 ERROR user_simtrace2.c:152 unknown simtrace msg type 0x00 > DST2 ERROR user_simtrace2.c:152 unknown simtrace msg type 0x00 > DST2 ERROR user_simtrace2.c:152 unknown simtrace msg type 0x00 > DST2 ERROR user_simtrace2.c:152 unknown simtrace msg type 0x00 > DST2 ERROR user_simtrace2.c:152 unknown simtrace msg type 0x00 > DST2 ERROR user_simtrace2.c:152 unknown simtrace msg type 0x00 > DST2 ERROR user_simtrace2.c:152 unknown simtrace msg type 0x00 > This is what the system shows > There should be a problem here. but i don't know why > I continued to try the server part and got the following. > root@debian:/bin# osmo-remsim-apitool -m 1 1 1 1 > root@debian:/bin# osmo-remsim-apitool -s > /slotmaps: {'slotmaps': [{'bank': {'bankId': 1, 'slotNr': 1}, 'client': > {'clientId': 1, 'slotNr': 1}, 'state': 'ACTIVE'}]} > root@debian:/bin# > At this time, the client2 part displays > DLINP NOTICE input/ipa.c:141 192.168.2.131:9999 connection done > DRSPRO NOTICE ../rspro_client_fsm.c:127 RSPRO_CLIENT(bankd){REESTABLISH}: > RSPRO link to 192.168.2.131:9999 UP > DRSPRO ERROR ../rspro_client_fsm.c:297 RSPRO_CLIENT(bankd){REESTABLISH}: > Event SRVC_E_KA_TERMINATED not permitted > DRSPRO INFO ../rspro_client_fsm.c:302 RSPRO_CLIENT(bankd){REESTABLISH}: > Destroying existing connection to server > DRSPRO INFO ../rspro_client_fsm.c:307 RSPRO_CLIENT(bankd){REESTABLISH}: > Creating TCP connection to server at 192.168.2.131:9999 > DLINP NOTICE input/ipa.c:141 192.168.2.131:9999 connection done > DRSPRO NOTICE ../rspro_client_fsm.c:127 RSPRO_CLIENT(bankd){REESTABLISH}: > RSPRO link to 192.168.2.131:9999 UP > DRSPRO ERROR ../rspro_client_fsm.c:297 RSPRO_CLIENT(bankd){REESTABLISH}: > Event SRVC_E_KA_TERMINATED not permitted > DRSPRO INFO ../rspro_client_fsm.c:302 RSPRO_CLIENT(bankd){REESTABLISH}: > Destroying existing connection to server > DRSPRO INFO ../rspro_client_fsm.c:307 RSPRO_CLIENT(bankd){REESTABLISH}: > Creating TCP connection to server at 192.168.2.131:9999 > DRSPRO ERROR ../rspro_client_fsm.c:360 RSPRO_CLIENT(bankd){REESTABLISH}: > Event SRVC_E_KA_TERMINATED not permitted > DRSPRO INFO ../rspro_client_fsm.c:364 RSPRO_CLIENT(bankd){REESTABLISH}: > Destroying existing connection to server > The display on the bankd side is > 3512 DBANKDW INFO bankd_main.c:442 [000 CONN_WAIT_ID] Changing state to > CONN_CLIENT > 3512 DBANKDW INFO bankd_main.c:619 [000 CONN_CLIENT] No slotmap (yet) for > client C(1:1) > 3512 DBANKDW INFO bankd_main.c:450 [000 CONN_CLIENT] Changing state to > CONN_CLIENT_WAIT_MAP (timeout=10) > 3512 DBANKDW INFO bankd_main.c:967 [000 CONN_CLIENT_WAIT_MAP] Error -2 > occurred: Cleaning up state > 3512 DBANKDW INFO bankd_main.c:442 [000 CONN_CLIENT_WAIT_MAP] Changing state > to ACCEPTING > 3512 DBANKDW INFO bankd_main.c:955 [000 ACCEPTING] Accepted connection from > 192.168.2.224:42813 > 3512 DBANKDW INFO bankd_main.c:442 [000 ACCEPTING] Changing state to > CONN_WAIT_ID > 3512 DBANKDW INFO bankd_main.c:655 [000 CONN_WAIT_ID] Rx RSPRO > connectClientReq(T=0, N='openstick', SW='remsim-client', VER='1.0.0') > > I want to use the method of exclusion. I want to make it clear that the name > of my bankd is also in the csv file. Is it correct? Is there any problem with > the configuration of bankd and client-st2? Also, when booting, does the > content displayed by the client's linux mean that my mobile phone is not > connected successfully?
