Hi All, Is it allowed to add a=ptime:xx for every codec listed in a single m= line? For example:
m=audio 5004 RTP/AVP 0 4 18 a=rtpmap:0 PCMU/8000 a=ptime:10 a=rtpmap:4 G723/8000 a=ptime:30 a=rtpmap:18 G729/8000 a=ptime:20 All the samples I've seen so far imply there is only one ptime per m= line, but this does not describe the "real world" where one would want to use different audio codecs with different packet times and different codecs operate on different [ms] frames. G.711 - 1ms G.729 - 10ms G.723 - 30ms i.e - specifiying 10ms does not make any sense for G.723, but does for G.729 and G.711. Regards, Danail Kirov _______________________________________________ Sip-implementors mailing list [EMAIL PROTECTED] http://lists.cs.columbia.edu/mailman/listinfo/sip-implementors
