Hi Brett Tate,
1) If we can not send the response in TCP, then how we can send the
reponse.
2 ) if we have to send Failure response, then what response code we
have to use ?
Regards,
Thangarajan.
"Brett Tate"
<[EMAIL PROTECTED]
com> To
Sent by: <[email protected]>
sip-implementors- cc
[EMAIL PROTECTED]
ia.edu Subject
RE: [Sip-implementors] Response
exceeding the maximum transmission
03/01/05 09:55 PM unit
> UAS receives a request via UDP ( sent-protocol
> in via is UDP ). The response to be sent has
> big body and exceeding the maximum transmission
> unit. whether UAS can send the response via TCP?
No. Selecting transport based upon message size only applies to requests.
I assume that it is because the transport of the Via entry should match the
transport being used; and the Via entry's transport value is part of the
request and response matching process.
_______________________________________________
Sip-implementors mailing list
[email protected]
http://lists.cs.columbia.edu/mailman/listinfo/sip-implementors
*********************** HSS-Private ***********************
"DISCLAIMER: This message is proprietary to Hughes Software Systems Limited
(HSS) and is intended solely for the use of the individual to whom it is
addressed. It may contain privileged or confidential information and
should not be circulated or used for any purpose other than for what it is
intended. If you have received this message in error, please notify the
originator immediately. If you are not the intended recipient, you are
notified that you are strictly prohibited from using, copying, altering, or
disclosing the contents of this message. HSS accepts no responsibility for
loss or damage arising from the use of the information transmitted by this
email including damage from virus."
_______________________________________________
Sip-implementors mailing list
[email protected]
http://lists.cs.columbia.edu/mailman/listinfo/sip-implementors
