Hi,
If a stream-based protocol (such as TCP) is used as transport, then the
content-length header field MUST be used.
please refer to section 20.14 of RFC 3261for more info.
Regards
Nagendra
"Isaac Dudy"
<[EMAIL PROTECTED]
rse.com> To
Sent by: <[email protected]>
sip-implementors- cc
[EMAIL PROTECTED]
ia.edu Subject
[Sip-implementors] Sending message
without body with TCP
08/02/2005 01:41
PM
Hi all.
Quick question:
Should sip message without a body sent in TCP, have a Content-Length
header with the value zero, or can the header be omitted ?
Thanks in advance,
David Isaac.
_______________________________________________
Sip-implementors mailing list
[email protected]
http://lists.cs.columbia.edu/mailman/listinfo/sip-implementors
*********************** FSS-Unclassified ***********************
"DISCLAIMER: This message is proprietary to Hughes Software Systems Limited
(HSS) and is intended solely for the use of the individual to whom it is
addressed. It may contain privileged or confidential information and
should not be circulated or used for any purpose other than for what it is
intended. If you have received this message in error, please notify the
originator immediately. If you are not the intended recipient, you are
notified that you are strictly prohibited from using, copying, altering, or
disclosing the contents of this message. HSS accepts no responsibility for
loss or damage arising from the use of the information transmitted by this
email including damage from virus."
_______________________________________________
Sip-implementors mailing list
[email protected]
http://lists.cs.columbia.edu/mailman/listinfo/sip-implementors
