Hi, 

In RFC3261 18.1.1 had mentioned that client will set the maddr to the 
destination multicast address, viz, the server address which can accept this 
request.
<Quote> 18.1.1
A client that sends a request to a multicast address MUST add the "maddr" 
parameter to its Via header field value containing the destination multicast 
address, and for IPv4, SHOULD add the "ttl" parameter with a value of 1.  Usage 
of IPv6 multicast is not defined in this specification, and will be a subject 
of future standardization when the need arises.
</Quote>

But when the Server send the response back, it will use the maddr in Via as 
mentioned in 18.2.2, so it means that the response will be sent to the server 
again (as the maddr is the destination multicast address)? Do I miss sth?

<Quote> 18.2.2
      o  Otherwise, if the Via header field value contains a "maddr"
         parameter, the response MUST be forwarded to the address listed
         there, using the port indicated in "sent-by", or port 5060 if
         none is present.  If the address is a multicast address, the
         response SHOULD be sent using the TTL indicated in the "ttl"
         parameter, or with a TTL of 1 if that parameter is not present.
</Quote>

Thanks in advance for your response.

***************************************************************************************
  
本邮件及其附件含有华为公司的保密信息,仅限于发送给上面地址中列出的个人或群组。禁止任何其他人以任何形式使用(包括但不限于全部或部分地泄露、复制、或散发)本邮件中的信息。如果您错收了本邮件,请您立即电话或邮件通知发件人并删除本邮件!
**************************************************************************************

***************************************************************************************
This e-mail and its attachments contain confidential information from HUAWEI, 
which is intended only for the person or entity whose address is listed above. 
Any use of the information contained herein in any way (including, but not 
limited to, total or partial disclosure, reproduction, or dissemination) by 
persons other than the intended recipient(s) is prohibited. If you receive this 
e-mail in error, please notify the sender by phone or email immediately and 
delete it!
***************************************************************************************
_______________________________________________
Sip-implementors mailing list
[email protected]
https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors

Reply via email to