Hi Vishal,

There is nothing wrong in the SDP you have specified. Perhaps problem is
with the end point,
which is treating m-line as mandatory parameter in the SDP. So  media
negotiation fails  and
results in failure.

refer to the following draft for Offer-Answer Examples
http://www.iptel.org/info/players/ietf/callflows/draft-johnston-mmusic-offer-answer-examples-01.txt

Rgds,
Amar
The greatest enemy of best is "good." If you're willing to accept "good"
you'll never be the "Best."


                                                                           
             "Agrawal, Vishal"                                             
             <[EMAIL PROTECTED]                                             
             om.com>                                                    To 
             Sent by:                  "Sip-Implementors"                  
             sip-implementors-         <[email protected]>  
             [EMAIL PROTECTED]                                          cc 
             ia.edu                                                        
                                                                   Subject 
                                       [Sip-implementors] RFC 3725         
             01/28/2006 03:46          Question - Call Flow IV             
             AM                                                            
                                                                           
                                                                           
                                                                           
                                                                           
                                                                           




Hello,

What SDP lines are MUST in the "no media" SDP sent in the offer 1 in the
call flow IV in the RFC 3725? What contact address should be used in the
"c" line? Can someone provide an example "no media" SDP?

All SIP phones (at least 4 vendors) reject the following "no media" SDP
in my INVITE (The same works if followed by valid "m=" line(s)) to the
phones...

v=0
o=test 1 1 IN IP4 10.2.12.10
s=-
c=IN IP4 10.2.12.10
t=0 0

Thanks,
Vishal
_______________________________________________
Sip-implementors mailing list
[email protected]
https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors



***********************  FSS-Unclassified   ***********************

_______________________________________________
Sip-implementors mailing list
[email protected]
https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors

Reply via email to