Hello, A lot of possibilities. But first try on wireshark decode as RTP . ( mark the udp packet , mouse right click and decode as RTP).
Best Regards, Valdemar Pavesi -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of ext Siga Sent: Friday, January 07, 2011 3:43 AM To: [email protected] Subject: [Sip-implementors] RTP Protocol cannot be started Hi, I have implemented a SIP Client and to extend my project I wrote a RTP Protocol and try to send the RTP packets and when I notice it using wireshark I get a strange message, let me show it so that you can have better idea *CLIENT SERVER* SIP Request:INVITE ------------------------------------*>* SIP Status: 100 Trying *<*------------------------------------ SIP/SDP Status: 200 OK *<*------------------------------------ SIP Request:ACK ------------------------------------*>* *UDP Source port: bre Destination port* ---------------------------------------*>* Here I am planning to send RTP Packets but instead I get this strange message on my wireshark. Do anybody have an idea where I am making my mistake. Regards, Siga _______________________________________________ Sip-implementors mailing list [email protected] https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors _______________________________________________ Sip-implementors mailing list [email protected] https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors
