Your Call-ID should change in the reboots. As per 3261, Call-ID should be same for all registrations in a single boot cycle only (same dialog). Not always the same.
-----Original Message----- From: Jing Jiang [mailto:jing.ji...@biamp.com] Sent: Wednesday, May 29, 2013 9:35 AM To: sip-implementors Subject: [Sip-implementors] out of sequence number When a SIP endpoint reboots, it will come to use the same initial sequence number to register with the proxy again. The proxy will complain it with out of sequence error. After timeout, the proxy will start to accept this registration again. How should I resolve this? Thanks, Jing ----------------------------------------------------------------------------------- BIAMP SYSTEMS EMAIL NOTICE The information contained in this email and any attachments is confidential and may be subject to copyright or other intellectual property protection. If you are not the intended recipient, you are not authorized to use or disclose this information, and we request that you notify us by reply mail or telephone and delete the original message from your mail system. ----------------------------------------------------------------------------------- _______________________________________________ Sip-implementors mailing list Sip-implementors@lists.cs.columbia.edu https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors _______________________________________________ Sip-implementors mailing list Sip-implementors@lists.cs.columbia.edu https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors