Saumitra,
Having the flag is not enough since the responding node may not know the
address of the requestor since intermediate peers may keep state and give
only their address in the via list.
The other issue is how does the sending peer know that it has a routable
address and this is what the relay draft suggest. 
Roni Even

-----Original Message-----
From: Das, Saumitra [mailto:[email protected]] 
Sent: Tuesday, February 17, 2009 8:18 PM
To: Roni Even; [email protected]
Subject: RE: [P2PSIP] direct routing support in RELOAD

Hi Roni,

  Thanks. I was asking that this support be added to the base draft. I think
the relay issue and the direct routing issue can be separated as they
require different levels of solutions.

Best,
Saumitra

-----Original Message-----
From: Roni Even [mailto:[email protected]] 
Sent: Tuesday, February 17, 2009 1:40 AM
To: Das, Saumitra; [email protected]
Subject: RE: [P2PSIP] direct routing support in RELOAD

Saumitra,
I think that draft-jiang-p2psip-relay-01 suggests similar solution of adding
a flag to the forwarding header.
Thanks
Roni Even

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of
Das, Saumitra
Sent: Tuesday, February 17, 2009 8:12 AM
To: [email protected]
Subject: [P2PSIP] direct routing support in RELOAD

Hi all,

  In the last meeting there was a discussion on direct routing and the
conclusions were (if I recall correctly) that this should not be something
that complicates the  protocol and that we could have support for indicating
the use of direct routing if the deployment is amenable to such a scenario.

 I would like to propose we add a flag bit in the forwarding/common header
that indicates that a direct routing response to a message be used by the
responding node. As a policy, implementations in certain scenarios would
enable the flag as necessary.

We can indicate that the responding node need not keep state to minimize
complications. The sending node can simply resend a request (e.g STORE) with
the flag turned off if does not receive a response to the initial STORE
request with the flag turned on.

This allows direct routing support in scenarios where the deployer or the
implementation knows it is dealing with reachable IP addresses. This is also
possible without any complications to the base protocol.

Best
Saumitra
_______________________________________________
P2PSIP mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/p2psip

_______________________________________________
P2PSIP mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/p2psip

Reply via email to