Hi, Nils.
Thank you a lot for the comments.
Before I ask new categories of questions on sip-implementors list, may i
elaborate my question and could you clarify your comments a little more ?
As i know of RFC 3455, the URIs returned in P-Associate-ID header of
REGISTER 200 response are to be populated as Address-of-Record of the
registered UA and are to be used in FROM headers of subsequent outward
requests by the UA.
Let's take these *pseudo* SIP msgs for example:
=> UA 'a' registers itself via its outbound proxy with this REGISTER
request:
REGISTER sip:domain
To: aor_of_a
From: aor_of_a (or, aor_of_3rd-party)
Contact: LOCATION_uri_of_a
=> Registrar returns 200:
200 OK
To: aor_of_a
From: aor_of_a (or, aor_of_3rd-party)
P-Associated-ID: paid1_of_a, paid2_of_a, ...
(let's assume paid1_of_a='1-408-444-5555')
=> Later, UA 'b' calls UA 'b':
INVITE tel:+1-408-444-5555
To: tel:+1-408-444-5555
From: aor_of_b
My question is: doesn't this INVITE go to IMS core and be resolved to
INVITE LOCATION_uri_of_a
To: tel:+1-408-444-5555
From: aor_of_b
before it can arrive at UA 'a' ????
That is, in my knowledge, once after location is looked up and resolved by a
SIP proxy, the INVITE Request-URI should no more be a tel uri, am i correct?
Please advise.
Thanks.
Cowby
----- Original Message -----
From: "Nils Ohlmeier" <[email protected]>
To: "Cowby" <[email protected]>
Cc: <[email protected]>
Sent: Friday, February 20, 2009 12:58 AM
Subject: Re: [Sip] questions about usage of tel URI with a SIP UA
Hello,
Am 20.02.2009 2:05 Uhr, schrieb Cowby:
Q1: is it possible that a SIP UA can receive incoming requests with tel
uri
as the request-uri?
In IMS yes.
Q2: if the answer to Q1 is yes, how does a SIP UA normally handle tel uri
to
match the UA itself?
Take a look at the P-Associated-URI header.
For example, if a UA has a mailto:"sip:[email protected]' as its IMS public
identity and +1-408-555-6666 as it global phone number,
Q1: is it possible that the UA's P-CSCF can route an INVITE
tel:+1-408-555-6666 request to the UA?
Yes, see above.
Q2: how can the UA match itself when it is configured as [email protected]
but
know nothing of its phone number?
See above as well.
BTW such questions should be directed to the sip-implementors mailing list
instead (although I'm not sure if they discuss IMS as well).
Best regards
Nils Ohlmeier
_______________________________________________
Sip mailing list https://www.ietf.org/mailman/listinfo/sip
This list is for NEW development of the core SIP Protocol
Use [email protected] for questions on current sip
Use [email protected] for new developments on the application of sip
