Hello,
I am using test to check a variable 1 and set variable 2 if the condition is
satisfied as follows...
<nop>
<action>
<!-- Assign the value in field5 of the CSV file to a $1 -->
<assignstr assign_to="1" value="[field5]"/>
<log message="value of variable 1 is : [$1]"/>
</actions>
</nop>
<nop>
<action>
<test assign_to="2" variable="1" compare="equal" value="0"/>
<log message="value of variable 1 is : [$1]"/>
<log message="value of variable 2 is : [$2]"/>
</actions>
</nop>
And in the next line of the scenario checks on this variable 2
<send next="1" test="2">
<![CDATA[
ACK sip:[EMAIL PROTECTED]:[field4] SIP/2.0
Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
From: [field1]
<sip:[EMAIL PROTECTED]:[local_port]>;tag=[pid]SIPpTag09[call_number]
To: sut <sip:[EMAIL PROTECTED]:[field4]>[peer_tag_param]
Call-ID: [call_id]
CSeq: 1 ACK
Contact: sip:[EMAIL PROTECTED]:[local_port]
Max-Forwards: 70
Subject: Performance Test
Content-Length: 0
]]>
</send>
When the value of the variable $1 is "0" or "1" , the variable $2 is always
set to TRUE and it is going to Label 1 always.
Can somebody let me know if there is something wrong with my scenario.
Thanks in advance,
Kind regards,
Pratima.
<nop>
<action>
<!-- Assign the value in field0 of the CSV file to a $1. -->
<assignstr assign_to="1" value="[field5]" />
</action>
</nop>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Sipp-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sipp-users
