Hi, This exe which was available unfortunately wasn't supporting pcap play. You can try the latest exe available (3.1.1) .
Regards Anuj -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andy Sent: Friday, May 30, 2008 7:45 AM To: [email protected] Subject: [Sipp-users] How to use sipp in windows ? Hi, all This below is the xml scenario file I'm using . ================================================================= <?xml version="1.0" encoding="ISO-8859-1" ?> <!DOCTYPE scenario SYSTEM "sipp.dtd"> <!-- This program is free software; you can redistribute it and/or --> <!-- modify it under the terms of the GNU General Public License as --> <!-- published by the Free Software Foundation; either version 2 of the --> <!-- License, or (at your option) any later version. --> <!-- --> <!-- This program is distributed in the hope that it will be useful, --> <!-- but WITHOUT ANY WARRANTY; without even the implied warranty of --> <!-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --> <!-- GNU General Public License for more details. --> <!-- --> <!-- You should have received a copy of the GNU General Public License --> <!-- along with this program; if not, write to the --> <!-- Free Software Foundation, Inc., --> <!-- 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA --> <!-- --> <!-- Sipp 'uac' scenario with pcap (rtp) play --> <!-- --> <scenario name="UAC with media"> <!-- In client mode (sipp placing calls), the Call-ID MUST be --> <!-- generated by sipp. To do so, use [call_id] keyword. --> <send retrans="500"> <![CDATA[ INVITE sip:[EMAIL PROTECTED]:[remote_port] SIP/2.0 Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch] From: [field0] <sip:[EMAIL PROTECTED]:[local_port]>;tag=[call_number] To: [field1] <sip:[EMAIL PROTECTED]:[remote_port]> Call-ID: [call_id] CSeq: 1 INVITE Contact: sip:[EMAIL PROTECTED]:[local_port] Max-Forwards: 70 Subject: Performance Test Content-Type: application/sdp Content-Length: [len] v=0 o=user1 53655765 2353687637 IN IP[local_ip_type] [local_ip] s=- c=IN IP[local_ip_type] [local_ip] t=0 0 m=audio [auto_media_port] RTP/AVP 8 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-11,16 ]]> </send> <recv response="407" auth="true"> </recv> <!-- By adding rrs="true" (Record Route Sets), the route sets --> <!-- are saved and used for following messages sent. Useful to test --> <!-- against stateful SIP proxies/B2BUAs. --> <!-- Packet lost can be simulated in any send/recv message by --> <!-- by adding the 'lost = "10"'. Value can be [1-100] percent. --> <send> <![CDATA[ ACK sip:[EMAIL PROTECTED]:[remote_port] SIP/2.0 Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch] From: [field0] <sip:[EMAIL PROTECTED]:[local_port]>;tag=[call_number] To: [field1] <sip:[EMAIL PROTECTED]:[remote_port]>[peer_tag_param] Call-ID: [call_id] CSeq: 1 ACK Contact: sip:[EMAIL PROTECTED]:[local_port] Max-Forwards: 70 Subject: Performance Test Content-Length: 0 ]]> </send> <send retrans="500"> <![CDATA[ INVITE sip:[EMAIL PROTECTED]:[remote_port] SIP/2.0 Via: SIP/2.0/[transport] [local_ip]:[local_port] From: [field0] <sip:[EMAIL PROTECTED]:[local_port]>;tag=[call_number] To: [field1] <sip:[EMAIL PROTECTED]:[remote_port]> Call-ID: [call_id] CSeq: 2 INVITE Contact: sip:[EMAIL PROTECTED]:[local_port] [field2] Max-Forwards: 70 Subject: Performance Test Content-Type: application/sdp Content-Length: [len] v=0 o=user1 53655765 2353687637 IN IP[local_ip_type] [local_ip] s=- t=0 0 c=IN IP[media_ip_type] [media_ip] m=audio [auto_media_port] RTP/AVP 0 a=rtpmap:0 PCMU/8000 ]]> </send> <recv response="100" optional="true"> </recv> <recv response="180" optional="true"> </recv> <recv response="200" rtd="true" crlf="true"> </recv> <!-- Play a pre-recorded PCAP file (RTP stream) --> <nop> <action> <exec play_pcap_audio="pcap/g711a.pcap"/> </action> </nop> <!-- Pause 8 seconds, which is approximately the duration of the --> <!-- PCAP file --> <pause milliseconds="5000"/> <!-- Play an out of band DTMF '1' '2' '3' '4' '5' '6' '7' '8' '9' '*' --> <nop> <action> <exec play_pcap_audio="pcap/dtmf_2833_1.pcap"/> </action> </nop> <pause milliseconds="250"/> <nop> <action> <exec play_pcap_audio="pcap/dtmf_2833_2.pcap"/> </action> </nop> <pause milliseconds="250"/> <nop> <action> <exec play_pcap_audio="pcap/dtmf_2833_3.pcap"/> </action> </nop> <pause milliseconds="250"/> <nop> <action> <exec play_pcap_audio="pcap/dtmf_2833_4.pcap"/> </action> </nop> <pause milliseconds="250"/> <nop> <action> <exec play_pcap_audio="pcap/dtmf_2833_5.pcap"/> </action> </nop> <pause milliseconds="250"/> <nop> <action> <exec play_pcap_audio="pcap/dtmf_2833_6.pcap"/> </action> </nop> <pause milliseconds="250"/> <nop> <action> <exec play_pcap_audio="pcap/dtmf_2833_7.pcap"/> </action> </nop> <pause milliseconds="250"/> <nop> <action> <exec play_pcap_audio="pcap/dtmf_2833_8.pcap"/> </action> </nop> <pause milliseconds="250"/> <nop> <action> <exec play_pcap_audio="pcap/dtmf_2833_9.pcap"/> </action> </nop> <pause milliseconds="3000"/> <!-- The 'crlf' option inserts a blank line in the statistics report. --> <send retrans="500"> <![CDATA[ BYE sip:[EMAIL PROTECTED]:[remote_port] SIP/2.0 Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch] From: [field0] <sip:[EMAIL PROTECTED]:[local_port]>;tag=[call_number] To: [field1] <sip:[EMAIL PROTECTED]:[remote_port]>[peer_tag_param] Call-ID: [call_id] CSeq: 2 BYE Contact: sip:[EMAIL PROTECTED]:[local_port] Max-Forwards: 70 Subject: Performance Test Content-Length: 0 ]]> </send> <recv response="200" crlf="true"> </recv> <!-- definition of the response time repartition table (unit is ms) --> <ResponseTimeRepartition value="10, 20, 30, 40, 50, 100, 150, 200"/> <!-- definition of the call length repartition table (unit is ms) --> <CallLengthRepartition value="10, 50, 100, 500, 1000, 5000, 10000"/> </scenario> ================================================================== I've installed sipp in windows, but when I use sipp with this file, it told me that "The auto_media_port keyword re quires PCAPPLAY." What is PCAPPLAY ? I have installed winpcap already. And I alse give the pcap file in the command option. What else should I do to use sipp with this scenario file ? Thanks so much. Best Regards. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Sipp-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sipp-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Sipp-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sipp-users
