The problem is in rates. I have only 2 users. When a I changed the cps of
register scenario in manager, the manager execution continued a bit more.
I'll work in this issue. I hope do not disturb you again.
Thanks David.
Regards,
On Wed, Oct 8, 2008 at 10:57 AM, Verbeiren, David <[EMAIL PROTECTED]
> wrote:
> Hi Vanessa,
>
>
>
> You have to understand the key concept of user pools in IMS Bench SIPp. The
> whole benchmark is very "user centric" with the test system acting as a user
> population. In order to be able to correctly emulate user behaviours, the
> system must keep track of the user state in some way (so as to, for example,
> place calls to registered or non registered users in the proportion
> specified by the scenario execution ratios; or to only deregister users that
> were previously registered). It is actually the scenarios that have to
> maintain this user state because only the scenarios know what they intend to
> do (SIPp has no knowledge of "being registered" or anything like that so it
> remains fully flexible). The way IMS Bench SIPp provides support for this to
> the scenario designer is by means of those user pools. You can define
> yourself what state (or possibly combination of states) a pool represent. In
> standard scenarios, pool 0 is the pool of non-registered users. Hence the
> ims_reg scenario takes users from this pool as you can see in the following
> scenario fragment (from beginning of ims_reg scenario):
>
> <nop>
>
> <action>
>
> <assign_user pool="0" scheme="rand_uni"/> <!-- 'Unregistered' user
> -->
>
> <move_user pool="1"/> <!-- Registration ongoing
> -->
>
> </action>
>
> </nop>
>
>
>
> It also puts the user into a temporary pool, pool 1, in order to avoid
> starting two registrations in parallel for the same user. Because an
> instance of the ims_reg scenario moves the user into pool 1 as soon as it
> has selected him to perform a registration, the same user cannot be picked
> again by another instance of ims_reg scenario because the scenario always
> takes its user from pool 0, not pool 1.
>
>
>
> I hope I'm making sense here. This is also explained in the IMS Bench SIPp
> online documentation (
> http://sipp.sourceforge.net/ims_bench/reference.html#User+oriented+mode)
> but I understand there is a lot of information to digest there.
>
>
>
> So the error
>
> 2008-10-07 14:27:33.624: User pool id[0] is empty -> Quitting!.
>
> means that the ims_reg scenario that was trying to run could not find any
> user in pool 0. Without a user, it can't run because its purpose is to
> register the user. If this happens right away when you start your test, then
> it probably means the file you specify by means of the –user_inf SIPp
> command line attribute is not correct. In this file, the first column
> indicates the initial pool in which the user is put. If you start by a
> registration phase (as in the standard benchmark), then all users should
> initially live in pool 0.
>
>
>
> If it happens after some time of correct execution, then it probably means
> you did not provide enough users in order to run the registration phase at
> the specified rate and for the specified duration. (e.g. 100 registrations/s
> for a 120 s registration phase requires at least 12000 users in the
> –user_inf specified file; and if you keep doing registrations together with
> other scenarios after the initial registration phase, then you should have
> slightly more users in order to avoid running out of users in pool 0 in the
> subsequent phases).
>
>
>
> -David
>
>
> ------------------------------
>
> *From:* Vanessa Tejada Muñoz [mailto:[EMAIL PROTECTED]
> *Sent:* mardi 7 octobre 2008 14:23
> *To:* Verbeiren, David
> *Subject:* Re: [Sipp-users] Run basic scenarios IMS bench.
>
>
>
> David,
>
> sorry for my constant questions :S I found an error in usuarios.csv. I
> create users.inf as I read in documentation, now I'm registered with the
> proxy but the execution don't continue with INVITE message. The error log
> said:
>
>
> Epi:/home/ims1/sipp_3_1_ims_bench/ims_bench # cat 20794_errors.log
> sipp: The following events occured:
> 2008-10-07 14:27:31.124: Created CConsole 0x81f5580.
> 2008-10-07 14:27:31.125: Set TSID: slot:0 TS1 (1).
> 2008-10-07 14:27:31.125: accept return 18 [IP4: 192.168.34.36:43445].
> 2008-10-07 14:27:31.125: ~ASSIGNID=0xffffffff - 0x1.
> 2008-10-07 14:27:31.125: ~ASSIGNID=0x1 - 0xffffffff.
> 2008-10-07 14:27:31.125: Set TSID: slot:1 TS1 (0).
> 2008-10-07 14:27:33.624: User pool id[0] is empty -> Quitting!.
> 2008-10-07 14:27:33.625: Quitting!.
> 2008-10-07 14:27:33.657: sipp.cpp: EXIT_TEST_RES_UNKNOWN quitting=1.
> 2008-10-07 14:27:33.658: final cleanup.
>
> My document ims_reg is equal to the IMS bench ims_reg.xml, I add the line
> "[authentication [EMAIL PROTECTED] password=[field4]
> challenge_from="u2" challenge_type=401]" for the none, but I don't
> understand what is the message "2008-10-07 14:27:33.624: User pool id[0] is
> empty -> Quitting!."
>
> Thanks
>
> On Tue, Oct 7, 2008 at 1:13 PM, Vanessa Tejada Muñoz <[EMAIL PROTECTED]>
> wrote:
>
> Sorry, I forgot attach again ims_reg.xml
>
>
>
> On Tue, Oct 7, 2008 at 1:06 PM, Vanessa Tejada Muñoz <[EMAIL PROTECTED]>
> wrote:
>
> As I read in the documentation, I execute manager.xml then sipp comand and
> finally press 'e' key in manager execution and finally the sipp comand, but
> the manager stop at time and I have to finish the test with crtl+c because
> nothing change.
>
> I attach the screens, usuarios.csv, ims_reg.xml (because I changed one line
> in REGISTER authentication) and log_sipp.
>
>
>
>
>
>
>
> On Tue, Oct 7, 2008 at 12:36 PM, Verbeiren, David <
> [EMAIL PROTECTED]> wrote:
>
> Could you please send screen output and log files from manager and sipp ?
>
>
>
> Note that, as described in
> http://sipp.sourceforge.net/ims_bench/reference.html#Running, once all
> desired components are started (and you see they all connected to the
> manager) you should press the 'e' key in the manager console.
> (alternatively, you can configured the expected number of SIPp instances and
> have the manager start automatically once they all have connected).
>
>
>
> -David
>
>
> ------------------------------
>
> *From:* Vanessa Tejada Muñoz [mailto:[EMAIL PROTECTED]
> *Sent:* mardi 7 octobre 2008 12:16
> *To:* [email protected]
> *Subject:* [Sipp-users] Run basic scenarios IMS bench.
>
>
>
> Hi all,
>
> I'm trying to run the basic scenarios in IMS Bench which appears in a
> folder called scen when you install it all.
>
> I execute ./manager - f manager.xml and then the comand: ./sipp
> ip_core_ims:4060 -rmctrl ip_manager_machine:5000 -user_inf scen/usuarios.csv
> -i ip_manager_machine -p 5000
>
> But the problem is that anything happen... Can anybody tell me how to test
> the basic scripts please? I think that understanding the basic funcionality
> I can create my own scenarios
>
> Best regards
>
>
> --
>
> Vanessa Tejada
>
> ---------------------------------------------------------------------
>
> Intel Corporation NV/SA
>
> Rond point Schuman 6, B-1040 Brussels
>
> RPM (Bruxelles) 0415.497.718.
>
> Citibank, Brussels, account 570/1031255/09
>
>
>
> This e-mail and any attachments may contain confidential material for
>
> the sole use of the intended recipient(s). Any review or distribution
>
> by others is strictly prohibited. If you are not the intended
>
> recipient, please contact the sender and delete all copies.
>
>
>
> --
>
> Vanessa Tejada
>
>
>
> --
>
> Vanessa Tejada
>
>
>
>
> --
>
> Vanessa Tejada
>
> ---------------------------------------------------------------------
> Intel Corporation NV/SA
> Rond point Schuman 6, B-1040 Brussels
> RPM (Bruxelles) 0415.497.718.
> Citibank, Brussels, account 570/1031255/09
>
> This e-mail and any attachments may contain confidential material for
> the sole use of the intended recipient(s). Any review or distribution
> by others is strictly prohibited. If you are not the intended
> recipient, please contact the sender and delete all copies.
>
>
--
Vanessa Tejada
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Sipp-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sipp-users
