This looks pretty cool. Running it through with your instructions, it gives
me:
'Unknown action: setdest.'
Looking over the documentation, it seem right and seems to reflect what they
have for the setdest. Not sure what the problem is...
On Mon, Apr 27, 2009 at 2:03 PM, mayamatakeshi <[email protected]>wrote:
> On Tue, Apr 28, 2009 at 2:09 AM, Paul Fugere <[email protected]>
> wrote:
> > Sorry if I wasn't clear on my problem/request.
> >
> > What I am trying to simulate is a SIP client to call through a PBX to a
> > phone under another PBX. Since both of these PBX machines share the same
> SIP
> > provider, the SIP provider will send a re-invite request so that the
> > communication occurs directly between the phones instead of the SIP
> > provider.
>
> OK. So you need to change uac.xml to expect a RE-INVITE (not a REGISTER).
> I'm sending you a uac.xml file which I use in my tests (please adjust
> uac.dat with the data needed for your test).
> I have modified it to wait for the RE-INVITE and call setdest with the
> info contained in the Contact header received in the message.
> But I don't know if this is proper SIP behavior. I would expect this
> change of end-points to happen using some sort of REFER. But I'm no
> SIP guru anyway.
>
> You can test it like this:
> sipp -i local_ip -p local_port -sf uac.xml -inf uac.dat -m 1 remote_ip
>
> > On Mon, Apr 27, 2009 at 12:56 PM, mayamatakeshi <[email protected]
> >
> > wrote:
> >>
> >> On Tue, Apr 28, 2009 at 1:40 AM, Paul Fugere <[email protected]
> >
> >> wrote:
> >> > I have been using the uac.xml. Not sure how to modify it to accept
> these
> >> > Register requests.
> >>
> >> Hum. What exactly are you trying to simulate with SIPp? From your
> >> initial post, I assumed you were trying to simulate a SIP client (a
> >> SIP phone maybe). But a SIP client is not supposed to be receiving
> >> REGISTER requests. That would be a registrar server. You can use SIPp
> >> to simulate that too, but I don't know how to make it simulate both at
> >> the same time bound to the same port. And a don't think that's what
> >> you are trying to do.
> >> Usually, I simulate and test separate operations.
> >>
> >> > I am using this base scenario because I believe that since the
> re-invite
> >> > is
> >> > done from the SIP provider, that it should work for a regular set-up.
> >> >
> >> > On Mon, Apr 27, 2009 at 12:24 PM, mayamatakeshi
> >> > <[email protected]>
> >> > wrote:
> >> >>
> >> >> On Tue, Apr 28, 2009 at 1:00 AM, Paul Fugere
> >> >> <[email protected]>
> >> >> wrote:
> >> >> > Thinking about it, since the Trunk is initiating the re-invite, I
> >> >> > might
> >> >> > be
> >> >> > going about the hard way by trying to initiate it from my SIPP.
> >> >> >
> >> >> > Is it possible to spoof it so that SIPP can act as a registered
> phone
> >> >> > on
> >> >> > my
> >> >> > PBX and contact an external phone number? I remember trying this
> and
> >> >> > I
> >> >> > was
> >> >> > receiving errors because it was discarding a Register packet.
> >> >>
> >> >> Sorry, I could not visualize your scenario (why there is a
> >> >> Registration now in it?).
> >> >> Maybe you could try to write the xml (it doesn't take much time) and
> >> >> check where it fails.
> >> >
> >> >
> >> >
> >> > --
> >> > Paul Fugere
> >> > [email protected]
> >> > 2T Computer Engineering
> >> > Engineering Society 'A'
> >> > Iron Warrior Advisory Board - A-Soc-At-Large
> >> > Bowling Director
> >> > Novelties Director
> >> > POETS Manager
> >> > POETS Programmer
> >> >
> >
> >
> >
> > --
> > Paul Fugere
> > [email protected]
> > 2T Computer Engineering
> > Engineering Society 'A'
> > Iron Warrior Advisory Board - A-Soc-At-Large
> > Bowling Director
> > Novelties Director
> > POETS Manager
> > POETS Programmer
> >
>
--
Paul Fugere
[email protected]
2T Computer Engineering
Engineering Society 'A'
Iron Warrior Advisory Board - A-Soc-At-Large
Bowling Director
Novelties Director
POETS Manager
POETS Programmer
------------------------------------------------------------------------------
Register Now & Save for Velocity, the Web Performance & Operations
Conference from O'Reilly Media. Velocity features a full day of
expert-led, hands-on workshops and two days of sessions from industry
leaders in dedicated Performance & Operations tracks. Use code vel09scf
and Save an extra 15% before 5/3. http://p.sf.net/sfu/velocityconf
_______________________________________________
Sipp-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sipp-users
