> From: David Jardin [mailto:[email protected]]
> Sent: Thursday, April 30, 2009 3:02 AM
> I would like to know if for a given sipp's instance, it is
> possible to use a different port for each entry of a .csv file.
> In other words, let's say I got the following .csv :
>
> david1;test;
> david2;test;
> david3;test;
>
> and so on...
>
> I would like to see in wireshark :
>
> REGISTER from 1.2.3.4:5060 for david1
> REGISTER from 1.2.3.4:5061 for david2
> REGISTER from 1.2.3.4:5062 for david3
>
> etc...
>
> Is it possible to do the same thing with different virtual IP
> addresses like :
>
> REGISTER from 1.2.3.4:5060 for david1
> REGISTER from 1.2.3.5:5061 for david2
> REGISTER from 1.2.3.6:5062 for david3
For both of the above, look at "-t un"/"-t tn".
> Last question : if you have 1000 users in the csv file and
> you launch sipp with a call_rate = 83. Will sipp manage to
> generate 83 calls per second in total or will it call 83
> times per seconds for each of the 1000 users?
83 calls per second, up to a configurable maximum outstanding calls,
which deafults to 3*N, OR 249.
HTH,
Mike
------------------------------------------------------------------------------
Register Now & Save for Velocity, the Web Performance & Operations
Conference from O'Reilly Media. Velocity features a full day of
expert-led, hands-on workshops and two days of sessions from industry
leaders in dedicated Performance & Operations tracks. Use code vel09scf
and Save an extra 15% before 5/3. http://p.sf.net/sfu/velocityconf
_______________________________________________
Sipp-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sipp-users
