I atteched you a register example from older posts.
Keep the cvs structure I advised you ;)
Good luck!
On Wed, Nov 25, 2009 at 9:04 PM, Jeff Wright <[email protected]>wrote:
> Greetings,
>
> I was wondering if someone might be able to assist me in understanding why I
> am having problems getting SIPP to register with a proxy, using
> authentication. The initial REGISTER request from SIPP receives 401 from
> the proxy (as expected); SIPP then re-sends a REGISTER request, but
> with only partial authentication credentials. SIPP seems to be omitting
> some of the required parameters. There is a telltale empty space and a
> leading comma that occur before the nonce parameter in the second REGISTER.
> I think this is where the realm, username and password would go. Anyway,
> the proxy ignores this second REGISTER request. Wireshark tags it as a
> "Malformed packet".
>
> Here is my command line invocation of SIPP:
>
> sipp 172.22.20.80 -sf register_clients_sideA_w_auth.xml -inf clients.csv -l
> 1 -i 172.22.20.151 -p 5063 -m 1
>
> Here's my SIPP scenario file:
>
> <?xml version="1.0" encoding="ISO-8859-1" ?>
> <scenario name="register_clients_sideA_w_auth">
> # SideA
> <send>
> <![CDATA[
> REGISTER sip:[field1] SIP/2.0
> Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
> From: <sip:[fiel...@[field1]>;tag=[call_number]
> To: <sip:[fiel...@[field1]>
> Call-ID: [call_id]
> CSeq: [cseq] REGISTER
> Contact: sip:[fiel...@[local_ip]:[local_port]
> Event: message-summary
> Max-Forwards: 70
> Expires: 3600
> User-Agent: SIPp/Linux
> Content-Length: 0
> ]]>
> </send>
>
> <recv response="200" optional="true" next="1">
> </recv>
> <recv response="401" auth="true">
> </recv>
> <send>
> <![CDATA[
> REGISTER sip:[field1] SIP/2.0
> Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
> From: <sip:[fiel...@[field1]>;tag=[call_number]
> To: <sip:[fiel...@[field1]>
> Call-ID: [call_id]
> CSeq: [cseq] REGISTER
> Contact: sip:[fiel...@[local_ip]:[local_port]
> Event: message-summary
> [field2]
> Max-Forwards: 70
> Expires: 3600
> User-Agent: SIPp/Linux
> Content-Length: 0
> ]]>
> </send>
> <recv response="200">
> </recv>
>
> <label id="1"\>
>
> </scenario>
>
> Here is the CSV file used as input:
>
> SEQUENTIAL
> sipp1;test.azteknetworks.net;[authentication username=sipp1
> password=sipp1];sipp2;test.azteknetworks.net;[authentication
> username=sipp2 password=sipp2]
>
> And here is a trace of the attempted registration. You can see in the last
> line of the last packet that Wireshark thinks this is a malformed packet
> (and it appears as if Wireshark is right). Why is SIPP not properly filling
> out the authentication information?
>
> No. Time Source Destination
> Protocol Info
> 75 11:11:54.742211 172.22.20.151 172.22.20.80
> SIP Request: REGISTER sip:test.azteknetworks.net
> Frame 75 (428 bytes on wire, 428 bytes captured)
> Ethernet II, Src: Elitegro_7c:d4:89 (00:16:ec:7c:d4:89), Dst:
> Giga-Byt_d2:63:ab (00:16:e6:d2:63:ab)
> Internet Protocol, Src: 172.22.20.151 (172.22.20.151), Dst: 172.22.20.80
> (172.22.20.80)
> User Datagram Protocol, Src Port: 5063 (5063), Dst Port: sip (5060)
> Session Initiation Protocol
> Request-Line: REGISTER sip:test.azteknetworks.net SIP/2.0
> Message Header
> Via: SIP/2.0/UDP 172.22.20.151:5063;branch=z9hG4bK-15651-1-0
> From:
> <sip:[email protected]<sip%[email protected]>
> >;tag=1
> To:
> <sip:[email protected]<sip%[email protected]>
> >
> Call-ID: [email protected]
> CSeq: 1 REGISTER
> Contact: sip:[email protected]:5063
> Event: message-summary
> Max-Forwards: 70
> Expires: 3600
> User-Agent: SIPp/Linux
> Content-Length: 0
>
> No. Time Source Destination
> Protocol Info
> 78 11:11:54.749600 172.22.20.80 172.22.20.151
> SIP Status: 401 Unauthorized (0 bindings)
> Frame 78 (645 bytes on wire, 645 bytes captured)
> Ethernet II, Src: Giga-Byt_d2:63:ab (00:16:e6:d2:63:ab), Dst:
> Elitegro_7c:d4:89 (00:16:ec:7c:d4:89)
> Internet Protocol, Src: 172.22.20.80 (172.22.20.80), Dst: 172.22.20.151
> (172.22.20.151)
> User Datagram Protocol, Src Port: sip (5060), Dst Port: 5063 (5063)
> Session Initiation Protocol
> Status-Line: SIP/2.0 401 Unauthorized
> Message Header
> From:
> <sip:[email protected]<sip%[email protected]>
> >;tag=1
> To:
> <sip:[email protected]<sip%[email protected]>
> >;tag=ae6f22e0-501416ac-13d8-50017-1f1-42187878-1f1
> Call-ID: [email protected]
> CSeq: 1 REGISTER
> WWW-Authenticate: Digest realm="test.azteknetworks.net
> ",nonce="2d41b28f3dea718c50b9cf3bbda3a84c1259172080",algorithm=MD5
> User-Agent: sipX/3.8.1 sipX/registry (Linux)
> Accept-Language: en
> Date: Wed, 25 Nov 2009 18:01:20 GMT
> Allow: INVITE,ACK,CANCEL,BYE,REFER,OPTIONS,REGISTER,SUBSCRIBE
> Supported: gruu
> Via: SIP/2.0/UDP 172.22.20.151:5063;branch=z9hG4bK-15651-1-0
> Content-Length: 0
>
> No. Time Source Destination
> Protocol Info
> 79 11:11:54.750290 172.22.20.151 172.22.20.80
> SIP Request: REGISTER sip:test.azteknetworks.net[Malformed Packet]
> Frame 79 (554 bytes on wire, 554 bytes captured)
> Ethernet II, Src: Elitegro_7c:d4:89 (00:16:ec:7c:d4:89), Dst:
> Giga-Byt_d2:63:ab (00:16:e6:d2:63:ab)
> Internet Protocol, Src: 172.22.20.151 (172.22.20.151), Dst: 172.22.20.80
> (172.22.20.80)
> User Datagram Protocol, Src Port: 5063 (5063), Dst Port: sip (5060)
> Session Initiation Protocol
> Request-Line: REGISTER sip:test.azteknetworks.net SIP/2.0
> Message Header
> Via: SIP/2.0/UDP 172.22.20.151:5063;branch=z9hG4bK-15651-1-3
> From:
> <sip:[email protected]<sip%[email protected]>
> >;tag=1
> To:
> <sip:[email protected]<sip%[email protected]>
> >
> Call-ID: [email protected]
> CSeq: 2 REGISTER
> Contact: sip:[email protected]:5063
> Event: message-summary
> Authorization:
> ,nonce="2d41b28f3dea718c50b9cf3bbda3a84c1259172080",response="b1c5f73f5497011ae29f6e6a69b466cd",algorithm=MD5
> [Malformed Packet: SIP]
>
> Any assistance would be greatly appreciated.
>
> Jeffrey Wright
> System Test Engineering Manager
> Aztek Networks, Inc.
>
>
>
> ------------------------------------------------------------------------------
> Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
> trial. Simplify your report design, integration and deployment - and focus
> on
> what you do best, core application coding. Discover what's new with
> Crystal Reports now. http://p.sf.net/sfu/bobj-july
> _______________________________________________
> Sipp-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/sipp-users
>
>
--
Vanessa Tejada
<?xml version="1.0" encoding="ISO-8859-1" ?>
<!DOCTYPE scenario SYSTEM "sipp.dtd">
<scenario name="registration">
<send retrans="500">
<![CDATA[
REGISTER sip:net1.test SIP/2.0
Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
Max-Forwards: 20
From: "bob" <sip:[email protected]>;tag=[call_number]
To: "bob" <sip:[email protected]>
P-Access-Network-Info: 3GPP-UTRAN-TDD;utran-cell-id-3gpp=C359A3913B20E
Call-ID: reg///[call_id]
CSeq: 1 REGISTER
Contact: <sip:b...@[local_ip]:[local_port]>
Expires: 3600
Content-Length: 0
User-Agent: SIPp 3.1
Authorization: Digest username="[email protected]", realm="net1.test"
Supported: path
]]>
</send>
<recv response="401" auth="true" rtd="true">
<action>
<ereg regexp=".*" search_in="hdr" header="Service-Route:" assign_to="1" />
</action>
</recv>
<send retrans="500">
<![CDATA[
REGISTER sip:net1.test SIP/2.0
Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
Route:[$1]
Max-Forwards: 20
From: "bob" <sip:[email protected]>;tag=[call_number]
To: "bob" <sip:[email protected]>
P-Access-Network-Info: 3GPP-UTRAN-TDD;utran-cell-id-3gpp=C359A3913B20E
Call-ID: reg///[call_id]
CSeq: 2 REGISTER
Contact: <sip:b...@[local_ip]:[local_port]>
Expires: 3600
Content-Length: 0
User-Agent: SIPp 3.1
[authentication [email protected] password=bob]
Supported: path
]]>
</send>
<recv response="200">
</recv>
<ResponseTimeRepartition value="10, 20"/>
<CallLengthRepartition value="10"/>
</scenario>
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Sipp-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sipp-users
