On Mon, 2008-07-21 at 18:54 +0530, Ananda Teertha wrote: > According to the Cluster management documentation for 3.11 build, it > should be possible to add the distributed servers from Master machine > config ui. Here are the steps to be followed. > > Install Master machine and distributed machine (iso/rpm installation). > Install TLS/SSL certificate in master. > Navigate to System>Locations in Master config ui. > Add the distributed server name and IP. > Click on 'Push Configuration'. > By this, the distributed machine should get all the required > configuration files(including TLS/SSL) from master and both the > systems should function in HA mode. > > However with 3.11.5-013033, the add location page prompts for only > name, address and SIP domain for the location and does not provide an > option to specify which is the Master and which is the distributed > machine. The Push Configuration option does not appear as well. Please > advise whether the steps followed are correct and whether the feature > is fully developed in the subject revision(as XECS-1413 and XECS-275 > are still open).
These features are not yet fully implemented and ready for testing. -- Scott Lawrence tel:+1.781.229.0533;ext=162 or sip:[EMAIL PROTECTED] sipXecs project coordinator - SIPfoundry http://www.sipfoundry.org/sipXecs CTO, Voice Solutions - Bluesocket Inc. http://www.bluesocket.com/ http://www.pingtel.com/ _______________________________________________ sipx-dev mailing list sipx-dev@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev
