On Wed, 2009-06-24 at 10:30 -0400, Matt Keys wrote: > > I don't have another 4.0 box laying around to test with but I'm almost > positive it would only reboot the phone you sent a profile to. Now it > reboots every phone that has that line associated, even though there > isn't a change to be made on some of them. > > E.g., The boss' phone at the office has 0155 and 1155 assigned. His > house phone only has 0155 but needs 3584. If I select the house phone, > add 3584, hit apply, then send the profile it will reboot both office > and home phone even though there are no changes made to the office > phone.
I think that if you were to try it again, you'd find that it reboots all phones that have that line on them. If not, then I can't figure out why it wouldn't. Part of this depends on the behavior of the phone. What sipXconfig does is send a 'check-sync' NOTIFY message to the address for the user associated with the first line on the phone you want to reboot. That message gets forked to all phones that have that address. Now what the message "means" is "check to see if you have new configuration and if so use it". If the phone is smart enough, it might detect that in fact there is no new configuration (that is, that the new configuration matches what it already has) and not reboot. What many phones actually seem to do is just reboot and check for configuration on the way back up. _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev sipXecs IP PBX -- http://www.sipfoundry.org/
