> I am trying to configure a Nortel 1120E phone to work with Sipx in a > VOIP lab. I have the server up and running but cannot get the phone > to register. The phone appears to only work with the DHCP on the > server if the physical phone is set for partial DHCP. Per TCPdump on > the server the server is sending a UDP port unreachable message for > port 4100 back to the phone. What port should be set in the phone? > Default should be 5060
> When I ran netstat -l | grep 5060 on the server the result is blank. The server is listening on > > several 51xx ports, including 5160. Is that configurable on the server somewhere? I don't think partial DHCP makes difference here. I just tried DHCP partial, and it worked just fine. Did you configure the phone from SipX WebUi or mannually? I suggest you use SipX plug&play webUi to configure the phone. You probably want to validate the settings. _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users