Realize sipxbridge in alpha code, posting this to sipx-dev would get you better response.
At the same time, you'll need to elaborate on "too much information", perhaps providing a packet capture or "technical explanation" from bandwidth.com as to what that really means. Since noone has performed interop testing with bandwidth.com on sipxbridge yet, you are in somewhat unchartered territory. Tony >>> "Brian Parks" <[EMAIL PROTECTED]> 07/17/08 07:58AM >>> ??? From: Brian Parks [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 16, 2008 8:02 AM To: [email protected] Subject: [sipx-users] sipXbridge 800, 866, 877, 888 Hello Everyone, I have just installed the development version (3.11.4) of sipxecs, so that I can test the sipXbridge. I am using bandwidth.com's sip trunking service. Everything seems to be working fine except for the toll free numbers. The technical support engineer at bandwidth.com told me that, when looking at my call trace our IP PBX is sending too much information and he thinks that the toll free carrier doesn't like the call setup message so they are rejecting the calls. Has anyone had this experience before and if so do you have a work around? Thanks! Brian Parks 248-327-3588 Companies With Vision _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
