hi all i'm having a problem setting up SIp trunks. i added the siptrunk and i make a tesk call with Xlite but there is no routing going through at all.
e.g 00447877918047. Sipx will not send any traffic to the sip trunk provider . Sip Provider>>>>>>>>>>>>>>SIPX>>>>>>>>>>Xlite. can you help please Version 3.10 regards. 2008/8/8 <[EMAIL PROTECTED]> > Send sipx-users mailing list submissions to > sipx-users@list.sipfoundry.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://list.sipfoundry.org/mailman/listinfo/sipx-users > or, via email, send a message with subject or body 'help' to > [EMAIL PROTECTED] > > You can reach the person managing the list at > [EMAIL PROTECTED] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of sipx-users digest..." > > Today's Topics: > > 1. NAT Traversal Rules Failure (Online Systems) > 2. Re: ACD Reports: inconsistency on Agent ActivitySummary > numbers (Scott Lawrence) > 3. Re: ACD just rings and rings (friend's issue) (Dean Hiller) > 4. Re: ACD just rings and rings (friend's issue) (Tony Graziano) > > > ---------- Forwarded message ---------- > From: Online Systems <[EMAIL PROTECTED]> > To: Sipx-Users <[EMAIL PROTECTED]> > Date: Thu, 07 Aug 2008 18:24:32 -0400 > Subject: [sipx-users] NAT Traversal Rules Failure > Hello, > > SipX 3.10.2 works very well for me (thanks again for the help), so I > decided to test out the Aug 1 build 3.11.4. Everything looks OK except a > freeswitch user not being found on startup. Right out of the gate there is a > nat traversal rules job failure upon initial web login. I realize this is a > temp build and not expected to work flawlessly, but is there some link that > I can follow to diagnose a possible cause for this? If the answer is wait a > few months until the official release I am A-OK with that. Thanks. > > -- > Josh > > > > > ---------- Forwarded message ---------- > From: Scott Lawrence <[EMAIL PROTECTED]> > To: Melcon Moraes <[EMAIL PROTECTED]> > Date: Thu, 07 Aug 2008 19:32:09 -0400 > Subject: Re: [sipx-users] ACD Reports: inconsistency on Agent > ActivitySummary numbers > > On Thu, 2008-08-07 at 18:51 -0300, Melcon Moraes wrote: > > :( > > > > No can do. I can't see a link to open a new issue. > > > > I'll open it as soon as I have access to do so. > > Done. > > -- > Scott Lawrence tel:+1.781.229.0533;ext=162 or sip:[EMAIL PROTECTED]<[EMAIL > PROTECTED]> > sipXecs project coordinator - SIPfoundry > http://www.sipfoundry.org/sipXecs > CTO, Voice Solutions - Bluesocket Inc. http://www.bluesocket.com/ > http://www.pingtel.com/ > > > > > ---------- Forwarded message ---------- > From: "Dean Hiller" <[EMAIL PROTECTED]> > To: "Picher, Michael" <[EMAIL PROTECTED]> > Date: Fri, 8 Aug 2008 08:25:12 +0800 > Subject: Re: [sipx-users] ACD just rings and rings (friend's issue) > I am not sure I know how to do all that with dns, dhcp as that seemed like > the harder route. isn't that bad to have two dhcp machines on your network > as my linksys is doing dhcp? Iam pretty sure I can turn dhcp off on the > linksys but if I do that, and sipx is assigning ip addresses, will my > network still work properly. Doesn't the linksys have to have an subnet ip > of 192.168.1.1, how will it get this address if sipx is the dhcp. > > It would ROCK if the sipx setup tutorial actually told you to > 1. step 1, turn off router's dhcp addressing if you have linksys etc. and > what the configuration is(as in any router, I think we can find the > settings). > > I guess I will try turning off dhcp and see if it just works and try it > out. > thx, > dean > > On Fri, Aug 8, 2008 at 5:43 AM, Picher, Michael <[EMAIL PROTECTED]>wrote: > >> Back up the train… >> >> >> >> Why don't you lab this thing on some private addressing on a regular >> network… you have my head spinning here with yours, and your friends and >> you both have things in dmz's. >> >> >> >> Walk before you run. Stay away from nats, dns mess and firewalls until >> you know you have a working solution. Follow the wiki, use dns/dhcp off of >> the pbx and make a system work first… then you can throw twists at it once >> you understand it a little better… >> >> >> >> Mike >> >> >> >> *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf >> Of *Dean Hiller >> *Sent:* Wednesday, August 06, 2008 11:26 PM >> *To:* Picher, Michael >> *Cc:* sipx-users@list.sipfoundry.org >> *Subject:* Re: [sipx-users] ACD just rings and rings (friend's issue) >> >> >> >> My friend is having a different issue. His sipx is behind a router/NAT as >> well, but he actually has DNS sipx.xxxxx.com pointing to that router and >> then has sipx in the DMZ(I am doing something similar). >> >> For some reason, when sipx receives an invite for [EMAIL PROTECTED], it >> forwards it to [EMAIL PROTECTED] why is this? What is going on here? >> sipx should accept the invite and send invite to [EMAIL PROTECTED], >> shouldn't it? >> >> thanks, >> dean >> >> On Thu, Aug 7, 2008 at 9:45 AM, Dean Hiller <[EMAIL PROTECTED]> wrote: >> >> Here are my screenshots(sorry for the delay...got hit with lots of >> issues). I am going to run a bunch of tests again today and see if I can >> get farther. >> thx, >> dean >> >> >> >> On Mon, Aug 4, 2008 at 9:17 PM, Picher, Michael <[EMAIL PROTECTED]> >> wrote: >> >> No, you only need to activate if you make changes to the ACD service. >> >> >> >> One thing that is typically recommended if you have multi-line phones is >> to create another extension that is used for the ACD only and make it a >> second line on the phone. This way when a user calls out on their phone >> they do not cause busy issues with the ACD calls… >> >> >> >> Not suggesting that this will solve your problem, it's just a typical >> recommendation. >> >> >> >> What are your queue settings? (shoot me a screen shot if you'd like). >> >> >> >> Mike >> >> >> >> *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf >> Of *Dean Hiller >> *Sent:* Monday, August 04, 2008 9:10 AM >> *To:* Picher, Michael >> *Cc:* sipx-users@list.sipfoundry.org >> *Subject:* Re: [sipx-users] ACD just rings and rings >> >> >> >> I reactivated a few times. do I also have to reactivate when agents sign >> in and out? I guess I will try again tomorrw the reactivating. I keep >> getting no agents, but I have signed them in, so I am not sure what is >> wrong. any logs somewhere to look at? >> thx, >> dean >> >> On Mon, Aug 4, 2008 at 6:42 PM, Picher, Michael <[EMAIL PROTECTED]> >> wrote: >> >> Any time you make an ACD change you have to re-activate the ACD. >> >> >> >> *From:* [EMAIL PROTECTED] [mailto: >> [EMAIL PROTECTED] *On Behalf Of *Dean Hiller >> *Sent:* Monday, August 04, 2008 1:43 AM >> *To:* sipx-users@list.sipfoundry.org >> *Subject:* [sipx-users] ACD just rings and rings >> >> >> >> I setup and ACD and added 2000 and 3000 to the lines(setting rocket as >> queue which I added already). I added 8 agents into this rocket queue, but >> when I call 2000 or 3000, it just rings and rings and rings. >> >> Also, my extension range is 1000 to 2999. My agents are all 2001 to >> 2008. I can call from 1000 extension to 2001 just fine, but when I call >> 3000 or 2000, I expect 2001 to ring since it is in the queue. * I see no >> calls coming in on the ACD page though like 2000 and 3000 are not lines of >> the ACD. *what am I doing wrong with the ACD here? >> thanks, >> >> -- >> Dean Hiller >> CEO/Founder of Extreme Software Offshoring >> http://xsoftware.biz >> http://www.linkedin.com/in/deanhiller >> Beijing Cell: 136-991-41547 >> US Phone: 303-376-5776 >> >> >> >> >> -- >> Dean Hiller >> CEO/Founder of Extreme Software Offshoring >> http://xsoftware.biz >> http://www.linkedin.com/in/deanhiller >> Beijing Cell: 136-991-41547 >> US Phone: 303-376-5776 >> >> >> >> >> -- >> Dean Hiller >> CEO/Founder of Extreme Software Offshoring >> http://xsoftware.biz >> http://www.linkedin.com/in/deanhiller >> Beijing Cell: 136-991-41547 >> US Phone: 303-376-5776 >> >> >> >> >> -- >> Dean Hiller >> CEO/Founder of Extreme Software Offshoring >> http://xsoftware.biz >> http://www.linkedin.com/in/deanhiller >> Beijing Cell: 136-991-41547 >> US Phone: 303-376-5776 >> > > > > -- > Dean Hiller > CEO/Founder of Extreme Software Offshoring > http://xsoftware.biz > http://www.linkedin.com/in/deanhiller > Beijing Cell: 136-991-41547 > US Phone: 303-376-5776 > > > > ---------- Forwarded message ---------- > From: "Tony Graziano" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]> > Date: Thu, 07 Aug 2008 21:51:49 -0300 > Subject: Re: [sipx-users] ACD just rings and rings (friend's issue) > SIP is not exactly simple. You need to understand why it uses DNS, the > options it uses for DHCP and so forth. > > It is "rolled" into a nice package to deliver all the basic needs into a > single CD because a lot of admins will run it on a separate IP > network/vlan or in a lab environment to learn the technology and > protocol before they decide to run a department or business on it. > > Get a hub, a laptop with x-lite or something on it, and set it up all by > itself. > > TWO DHCP server's is a bad thing. A linksys router can't push out the > options that SIP needs. If the SIPX server has the linksys as its > default router, the router can be a router, and sipx could do DNS, DHCP > & NTP. But you ought to learn how to administer them in Linux first > before trying to make it a production system. > > Trying to route calls or users through the WAN port of a Linksys router > for SIP is a bad idea. > > Get your feet wet like Mike suggests. If you are a Linux newbie, try > getting webmin (http://www.webmin.com) on it to have insight to DHCP, > DNS & NTP. > > Tony > >>> "Dean Hiller" <[EMAIL PROTECTED]> 08/07/08 20:26 PM >>> > I am not sure I know how to do all that with dns, dhcp as that seemed > like > the harder route. isn't that bad to have two dhcp machines on your > network > as my linksys is doing dhcp? Iam pretty sure I can turn dhcp off on the > linksys but if I do that, and sipx is assigning ip addresses, will my > network still work properly. Doesn't the linksys have to have an subnet > ip > of 192.168.1.1, how will it get this address if sipx is the dhcp. > > It would ROCK if the sipx setup tutorial actually told you to > 1. step 1, turn off router's dhcp addressing if you have linksys etc. > and > what the configuration is(as in any router, I think we can find the > settings). > > I guess I will try turning off dhcp and see if it just works and try it > out. > thx, > dean > > On Fri, Aug 8, 2008 at 5:43 AM, Picher, Michael > <[EMAIL PROTECTED]>wrote: > > > Back up the train… > > > > > > > > Why don't you lab this thing on some private addressing on a regular > > network… you have my head spinning here with yours, and your friends > and > > you both have things in dmz's. > > > > > > > > Walk before you run. Stay away from nats, dns mess and firewalls > until you > > know you have a working solution. Follow the wiki, use dns/dhcp off > of the > > pbx and make a system work first… then you can throw twists at it > once you > > understand it a little better… > > > > > > > > Mike > > > > > > > > *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On > Behalf Of > > *Dean Hiller > > *Sent:* Wednesday, August 06, 2008 11:26 PM > > *To:* Picher, Michael > > *Cc:* sipx-users@list.sipfoundry.org > > *Subject:* Re: [sipx-users] ACD just rings and rings (friend's issue) > > > > > > > > My friend is having a different issue. His sipx is behind a > router/NAT as > > well, but he actually has DNS sipx.xxxxx.com pointing to that router > and > > then has sipx in the DMZ(I am doing something similar). > > > > For some reason, when sipx receives an invite for [EMAIL PROTECTED], > it > > forwards it to [EMAIL PROTECTED] why is this? What is going on here? > > sipx should accept the invite and send invite to > [EMAIL PROTECTED], > > shouldn't it? > > > > thanks, > > dean > > > > On Thu, Aug 7, 2008 at 9:45 AM, Dean Hiller <[EMAIL PROTECTED]> > wrote: > > > > Here are my screenshots(sorry for the delay...got hit with lots of > > issues). I am going to run a bunch of tests again today and see if I > can > > get farther. > > thx, > > dean > > > > > > > > On Mon, Aug 4, 2008 at 9:17 PM, Picher, Michael > <[EMAIL PROTECTED]> > > wrote: > > > > No, you only need to activate if you make changes to the ACD service. > > > > > > > > One thing that is typically recommended if you have multi-line phones > is to > > create another extension that is used for the ACD only and make it a > second > > line on the phone. This way when a user calls out on their phone they > do > > not cause busy issues with the ACD calls… > > > > > > > > Not suggesting that this will solve your problem, it's just a typical > > recommendation. > > > > > > > > What are your queue settings? (shoot me a screen shot if you'd like). > > > > > > > > Mike > > > > > > > > *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On > Behalf Of > > *Dean Hiller > > *Sent:* Monday, August 04, 2008 9:10 AM > > *To:* Picher, Michael > > *Cc:* sipx-users@list.sipfoundry.org > > *Subject:* Re: [sipx-users] ACD just rings and rings > > > > > > > > I reactivated a few times. do I also have to reactivate when agents > sign > > in and out? I guess I will try again tomorrw the reactivating. I > keep > > getting no agents, but I have signed them in, so I am not sure what is > > wrong. any logs somewhere to look at? > > thx, > > dean > > > > On Mon, Aug 4, 2008 at 6:42 PM, Picher, Michael > <[EMAIL PROTECTED]> > > wrote: > > > > Any time you make an ACD change you have to re-activate the ACD. > > > > > > > > *From:* [EMAIL PROTECTED] [mailto: > > [EMAIL PROTECTED] *On Behalf Of *Dean Hiller > > *Sent:* Monday, August 04, 2008 1:43 AM > > *To:* sipx-users@list.sipfoundry.org > > *Subject:* [sipx-users] ACD just rings and rings > > > > > > > > I setup and ACD and added 2000 and 3000 to the lines(setting rocket as > > queue which I added already). I added 8 agents into this rocket > queue, but > > when I call 2000 or 3000, it just rings and rings and rings. > > > > Also, my extension range is 1000 to 2999. My agents are all 2001 to > > 2008. I can call from 1000 extension to 2001 just fine, but when I > call > > 3000 or 2000, I expect 2001 to ring since it is in the queue. * I see > no > > calls coming in on the ACD page though like 2000 and 3000 are not > lines of > > the ACD. *what am I doing wrong with the ACD here? > > thanks, > > > > -- > > Dean Hiller > > CEO/Founder of Extreme Software Offshoring > > http://xsoftware.biz > > http://www.linkedin.com/in/deanhiller > > Beijing Cell: 136-991-41547 > > US Phone: 303-376-5776 > > > > > > > > > > -- > > Dean Hiller > > CEO/Founder of Extreme Software Offshoring > > http://xsoftware.biz > > http://www.linkedin.com/in/deanhiller > > Beijing Cell: 136-991-41547 > > US Phone: 303-376-5776 > > > > > > > > > > -- > > Dean Hiller > > CEO/Founder of Extreme Software Offshoring > > http://xsoftware.biz > > http://www.linkedin.com/in/deanhiller > > Beijing Cell: 136-991-41547 > > US Phone: 303-376-5776 > > > > > > > > > > -- > > Dean Hiller > > CEO/Founder of Extreme Software Offshoring > > http://xsoftware.biz > > http://www.linkedin.com/in/deanhiller > > Beijing Cell: 136-991-41547 > > US Phone: 303-376-5776 > > > > > > -- > Dean Hiller > CEO/Founder of Extreme Software Offshoring > http://xsoftware.biz > http://www.linkedin.com/in/deanhiller > Beijing Cell: 136-991-41547 > US Phone: 303-376-5776 > > > > _______________________________________________ > sipx-users mailing list > sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
