No tricks. This assumes ETH0 is on the network where sipx is installed. ETH0 has to have two IP's bound to it. The ALIAS (second IP) needs to be the one used by sipx for siptrunk/gateway addressing. No change is necessary on ETH1. This way registration occur on the main private IP, but trunking traffic happens on the ETH0 ALIAS IP. This also means the dialplan in the ingate needs to reflect the ALIAS IP instead of the main ETH0 IP. It also assumes remote sip connectivity is turned on. Here we use DNS SRV for everything, so no reconfig for counterpath is needed based on network location.
>>> "voice" <[EMAIL PROTECTED]> 10/27/2008 12:07:01 PM >>> ? Hi Has anyone gotten x-lite 4.0 to register from remote location through inGate => sipX? I have gotten it to ring on remote laptop from an AT&T phone but will not register from remote laptop. What's the trick? r
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
