Ryan,
You can however change the unbound number that the gateway is ringing.
All calls however then will hit that number. Usually you can set this
on a line by line basis.
So, manually configure the gateway and set the inbound number to
whatever extension you'd like. I would do this normally for inbound
routing anyway where we want to hit a live person during the day and an
AA at night.
Route it to a 'phantom' extension. Setup a schedule on that phantom and
then use your forwarding on that account to route where the call goes.
Thanks,
Mike
> -----Original Message-----
> From: sipx-users-boun...@list.sipfoundry.org [mailto:sipx-users-
> boun...@list.sipfoundry.org] On Behalf Of Tony Graziano
> Sent: Monday, January 05, 2009 8:47 PM
> To: gerryl...@drouillard.ca; sipx-users@list.sipfoundry.org
> Subject: Re: [sipx-users] Audiocodes MP-118 FX0 auto dialing to non-
> operator
>
> I think the question he is asking is different than what you are
> offering as an answer.
>
> I think what the Quigley needs to know is that a PSTN gateway cannot
> dial users directly (i.e. Can dial 100, aa's, hunt groups). As.
> Gateway, it doesn't have that kind of authority.
>
> Quigley could also state his desired end result a little more clearly
> to get better direction.
>
> I'm not a Audiocodes fan, and prefer Patton for gateways, but I think
> the issue is due to the permissions allowed for a PSTN gateway.
>
> Sorry my answer is short, on my Blackberry and my thumbs get tired.
> -----Original Message-----
> From: Gerald Drouillard <gerryl...@drouillard.ca>
> To: <sipx-users@list.sipfoundry.org>
>
> Sent: 1/5/2009 8:20:04 PM
> Subject: Re: [sipx-users] Audiocodes MP-118 FX0 auto dialing to non-
> operator
>
> On 1/5/2009 1:14 PM, Ryan Quigley wrote:
> > Hi,
> > How does one go about routing an incoming PSTN line through an
> > Audiocodes MP-118 to anything other than the operator Auto
Attendant?
> > I'm trying to route directly to a Hunt Group and bypass the
operator,
> > but setting the Destination Phone Number to anything other than
> > "operator" or "100" doesn't work. No forwarding takes place.
>
> Works for me. I use the audiocodes web admin interface instead of
sipx
> to manage the audiocodes device as I am using the latest firmware on
> the
> MP-118 and it was a battle to get everything balanced out.
>
> --
> Regards
> --------------------------------------
> Gerald Drouillard
> Technology Architect
> Drouillard & Associates, Inc.
> http://www.Drouillard.ca
> _______________________________________________
> sipx-users mailing list
> sipx-users@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users
> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
>
> _______________________________________________
> sipx-users mailing list
> sipx-users@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users
> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
_______________________________________________
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
