> had a disaster of a day here, been trying to install a Samsung Ubigate > gateway onto a Siemens switch in order to get my Sip-X installation up > and running. Basically, the gateway is in place and speaking to the > TDM switch, and traffic passes happily between them. Outgoing calls > are fine, no problem at all. Inbound calls however, ring the phone > momentarily and then cut off, while the caller hears the classic 'that > extension is not valid'. Both the phone and gateway get a cancel > message from the Sip-X box. The extensions are defined as normal in > Sip-X, the phones are registered, the message gets there and then is > just as quickly cancelled. Infuriating!
It sounds as though your calls are forking to _both_ the voicemail and the phone at the same time. The phone rings, but is then canceled because the mediaserver answers (but the call was not presented in a way that actually reaches the mailbox, so you get the error message). I have no idea why the gateway would be getting a cancel. To debug this, you'll need to trace the message flow and see what's going wrong. See: http://sipx-wiki.calivia.com/index.php/Display_SIP_message_flow_using_Sipviewer#Getting_SIP_Messages_to_display when you get the trace data, take a look at it using sipviewer and/or post the trace with a description of your configuration (identify components by IP address), what you were doing, and which call in the trace you're talking about (by call-id or frame number in the trace, preferably). > I figure it's a dial plan issue, but I cant think what. It worked > perfectly for my analogue gateway, but not now with my digital one. > I'm not thinking straight after 8 hours on the job with no food or > water, so I'll try and fix it tomorrow. I'm using version 3.10 from > the build disk, anyone had this issue before? after all that time and frustration it's understandable, but try not to start a new thread on the list by replying to an existing unrelated message - even if you change the subject line, the References header included (correctly) by your mail program causes it to show as part of the other thread in good mailers and the archive. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
