No, I get an error when I try to export. I think I will be able to achieve (most) of my outgoing scenario with a number of custom dialplan rules. Thanks
On Thu, May 21, 2009 at 9:15 AM, Tony Graziano <tgrazi...@myitdepartment.net > wrote: > Did you create a sample then export it to see if the forward was listed in > the exported file? > -----Original Message----- > From: Hazza <hazz...@gmail.com> > To: Michael Picher <mpic...@cmctechgroup.com> > To: <sipx-users@list.sipfoundry.org> > > Sent: 5/20/2009 5:10:25 PM > Subject: Re: [sipx-users] Lots of Speed Dials and Incoming Caller id > mapping > > Has this functionality changed in 4.0? I can't work out how to import a > file > with "Forward Rule" as a field. > Thanks > > On Thu, May 21, 2009 at 12:31 AM, Picher, Michael > <mpic...@cmctechgroup.com>wrote: > > > Yes, I used the import. > > > > > > > > You can use ‘export’ to get the proper CSV format before you populate the > > table. > > > > > > > > *From:* Hazza [mailto:hazz...@gmail.com] > > *Sent:* Tuesday, May 19, 2009 5:03 PM > > *To:* Picher, Michael > > *Subject:* Re: [sipx-users] Lots of Speed Dials and Incoming Caller id > > mapping > > > > > > > > Do I then use the bulk loader to load this file? > > > > > > > > Thanks > > > > On Tue, May 19, 2009 at 11:30 PM, Picher, Michael < > > mpic...@cmctechgroup.com> wrote: > > > > I've done something similar for a customer for DID purposes. > > > > > > > > Used a spreadsheet to create an import file and created what i call > phantom > > users for routing: > > > > > > > > User Alias Forward Rule > > > > DID1234 1234 5551212 > > > > DID1235 1235 5551213 > > > > > > > > etc... > > > > > > > > You might also be able to do some tricks with your gateway to transform / > > route numbers, for example add a special prefix so that you can write > simple > > routing dial plan entries. > > > > > > > > Not sure if this helps or not... > > > > > > > > Mike > > ------------------------------ > > > > *From:* sipx-users-boun...@list.sipfoundry.org on behalf of hazzanz > > *Sent:* Tue 5/19/2009 6:25 AM > > *To:* sipx-users@list.sipfoundry.org > > *Subject:* [sipx-users] Lots of Speed Dials and Incoming Caller id > mapping > > > > As part of migration from a legacy pbx to sipX (at least I hope) I need > > to do the following: > > > > 1) Map a large number of short codes to external numbers ie 6600 -> > > 041234567 > > > > 2) Do the reverse for caller-id on incoming calls i.e map 041234567->6600 > > > > Unfortunately there is no pattern to the transform so it will need to be > > a table or file lookup. Is there someway to achieve this? I have looked > > at the externalAliases.aliasAddins but don't seem to be able to get this > > working with this file: > > > > <items type="alias" > > xmlns="http://www.sipfoundry.org/sipX/schema/xml/alias-00-00"> > > <!-- map 1234567 to another number at another domain --> > > <item> > > <identity>6...@example.com</identity> > > <contact><sip:041234...@example></contact> > > </item> > > </items> > > > > But it just doesn't seem to map. All suggestions welcome! > > > > Thanks > > > > _______________________________________________ > > sipx-users mailing list > > sipx-users@list.sipfoundry.org > > List Archive: http://list.sipfoundry.org/archive/sipx-users > > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > > > > > > > >
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users