It sounds like the gateway is not handling the refer properly. I don't use audiocodes anymore, but that kind of behavior can be other things. Make sure you have the correct or recent firmware. You should be able to get some help from this list because a lot of people here use audiocodes too.
Tony -----Original Message----- From: Cesar Artiga <m...@calcom.us> To: <sipx-users@list.sipfoundry.org> Sent: 7/18/2009 11:27:18 AM Subject: [sipx-users] Incoming calls are dropped when I dial an extension Hi, I have a problem that I need help with. When I call in the Auto Attendant responds without any problem, but the call is dropped soon after I dial the extension (200). With that said any calls from the inside go out without a problem, which would mean that the Gateway is working just fine. I also can call, without a problem, any of the other extensions that I have configured. Here is what I have: Router with QoS enabled SipX 4.0.1 Audio Codes MP-108 Gateway Polycom 430 Chances are the problem is somewhere between the chair and the keyboard because I made a similar configuration work in the past. At one point I even opened all ports going to the server just to make sure that it wasn't an issue with my router. I have also re-installed SipX to make sure that it wasn't an installation problem. Any help and/or suggestions will be greatly appreciated. Thanks, -Cesar _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
