Josh wrote: > It appears Polycom Firmware 3.2.1 is now available to the > general public. Are there currently plans to get sipXconfig > outfitted with the newest config options in sipX 4.2 or will > that have to wait until a later release?
Done. (I'm hoping to ultimately support Polycom 3.2.2 in sipXecs 4.2, but it depends on release dates.) BTW, here's a good link to check what Polycom version is currently supported in the main branch: http://sipxecs.sipfoundry.org/rep/sipXecs/main/sipXconfig/plugins/polyco m/etc/polycom/mac-address.cfg.vm Look at the "Compliant with SIP Application" line. Here are the Polycom 3.2.0 fixes/enhancements that we were tracking: - XTRN-357: Request for configuration to disable ringing BLF Caller ID screen display (See XX-6426, this new options will be disabled by default in sipXecs 4.2.) - XTRN-520: Inconsistent treatment upon having call rejected by non-Polycom phones (603 vs. 486) - XTRN-456: MOH dialogs reported on dialog event subscription, results in incorrect BLF - XTRN-497: 30 seconds delay to get Resum button on consultative transfer to DND phone - XTRN-245: Blind Transfer using "ringing" BLF fails and causes "ringing" BLF indication to stop until phone rebooted Note also that a number of Polycom models (301, 501, 600, 601, & 4000) were deemed "legacy" as of 3.2.0. They won't run anything later than 3.1.X. As usual, the Polycom release notes are invaluable: http://downloads.polycom.com/voice/voip/relnotes/spip_ssip_vvx_3_2_1_rel notes.pdf -Paul [email protected] _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
