On Wed, 2009-10-21 at 12:43 +0100, Mike J. Howarth wrote: > Hi, > > Relatively new to SipX, and having a few problems with inter-pbx > connections. > > What I want to achieve is : > > SipX-A through SIP Trunk to SipX-B using SBC’s – because these will > ultimately be behind firewalls. > > I’ve gone through steps to define what I think needs defining and am > now seeing packets going between the 2 instances for SIP trunk > registration, but are being rejected with an authorisation error. > > SO – where do I define the appropriate user name and password for each > end ?? > > Config so far (similar both ends): > > Site-to-Site Dial Plan with Unmanaged Gateway specified. > > Unmanaged Gw has IP address specified for far end. > > Internal SBC on server > > Packet errors seen : > > 0.000000 10.2.1.222 -> 10.1.10.100 SIP Request: REGISTER > sip:10.1.10.100 > > 0.061025 10.1.10.100 -> 10.2.1.222 SIP Status: 401 Unauthorized > (0 bindings) > > I’ve look at the documentation for connecting 2 SipX PBX’s together – > but it is somewhat sparse ! <grin> > > Could someone please give me an idea where I need to look for this > authorisation, and any pointers to other things to work with to > achieve a working SIP trunk over SBC’s
First - when you say SBCs, do you mean sipXbridge or some external SBC? This really isn't something that we meant to support in this first version of sipXbridge, so you're a little out on the leading edge here. You shouldn't need to register at all if all you want to do is send calls between the two PBXs - try configuring them as trunks that do not require registration. _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
