Staffan,
Please shoot me a sanitized config or just strip out pw info and I can
adjust the rest for the Wiki.
Thanks,
Mike
From: Staffan Kerker [mailto:ietf-li...@kerker.se]
Sent: Wednesday, December 02, 2009 12:36 PM
To: Dylan Ebner
Cc: Mike Ketchum; Picher, Michael; sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] Cisco router as PSTN Gateway
Hi
Are you sure you have DSPs installed in the router (PVDM2-8/16/32/64)?
DSPs are needed to convert TDM voice to IP voice. Make sure you have the
DSPs installed and the ISDN interface (se 0/0/0:23) should pop up once
you set the pri-group timeslots command on the controller.
Also, T-track IOS is in my opinioin the best IOS if you wanna do VoIP,
and SIP. (12.4.24T2 being the latest I think)
Please let me know if you need any further assistance.
Best regards,
/Staffan
On 2 dec 2009, at 18.29, Dylan Ebner wrote:
I have tried using 12.2 Mainline IP Enterprise and 12.4 Voice to Voice
Gateway. What seems to be missing is the ability to set the voice-card
command and the pri-group timeslots command in the controller. Without
this I cannot get a serial interface at 0/0/0:23. The closest I got was
with the voice to voice gateway image which had the voice-card option,
but would not let me set it. I wish I new what feature enabled the
pri-group command, then I could just use the Cisco IOS advisor.
I am going to try a 12.4 Mainline Enterprise IP image. Maybe that will
do the trick.
Thanks
Dylan Ebner, Network Engineer
Consulting Radiologists, Ltd.
1221 Nicollet Mall, Minneapolis, MN 55403
ph. 612.573.2236 fax. 612.573.2250
dylan.eb...@crlmed.com
www.consultingradiologists.com <http://www.consultingradiologists.com/>
________________________________
From: Mike Ketchum [mailto:mike_ketc...@comcast.net]
Sent: Wednesday, December 02, 2009 11:08 AM
To: Dylan Ebner
Cc: Picher, Michael; Staffan Kerker; sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] Cisco router as PSTN Gateway
What IOS are you using?
Dylan Ebner wrote:
Thanks everyone for the posts. This has been most helpful. I have found
several examples online when searching "cisco pstn gateway", most of the
config examples are for Asterisk, but the basics should be the same. The
problem I am running into is none of the examples are going into detail
about the hardware they are using or the IOS image.
Currently I am trying to use a 3662 with a VWIC-2MFT-T1 but I am having
trouble getting the IOS allowing me to setup the controller as a voice
card. This might be a limitation on the router or my IOS image. I don't
know yet.
I would gladly submit a sanitized config if I can get this working. I
may switch to a 2611XM router, they are a little newer and maybe are
supported better from Cisco on the voice side.
Dylan Ebner
________________________________
From: Picher, Michael [mailto:mpic...@cmctechgroup.com]
Sent: Wednesday, December 02, 2009 4:34 AM
To: Staffan Kerker; Dylan Ebner
Cc: sipx-users@list.sipfoundry.org
Subject: RE: [sipx-users] Cisco router as PSTN Gateway
Staffan,
Perhaps a sanitized config file would help all involved. I can post it
to the Wiki also.
Thanks,
Mike
From: sipx-users-boun...@list.sipfoundry.org
[mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Staffan
Kerker
Sent: Tuesday, December 01, 2009 5:22 PM
To: Dylan Ebner
Cc: sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] Cisco router as PSTN Gateway
Hi
I'm using Cisco routers as gateway (PRI, FXS, FXO) with SipX with great
success. The routers are quite flexible in how they
may be used with SipX and compared to Audiocodes configuration GUI (if
you're used to Cisco CLI) the Cisco is a dream...
For best SIP functionality I would recommend a IP Voice IOS in the
T-track.
Best regards,
/Staffan
On 1 dec 2009, at 22.06, Dylan Ebner wrote:
What IOS should I be using? I am planning on using an old 3662 that I
have. Should I be using the VOICE TO IP VOICE GATEWAY image? Or should
most IOS images work?
Thanks
Dylan Ebner, Network Engineer
Consulting Radiologists, Ltd.
1221 Nicollet Mall, Minneapolis, MN 55403
ph. 612.573.2236 fax. 612.573.2250
dylan.eb...@crlmed.com
www.consultingradiologists.com <http://www.consultingradiologists.com/>
________________________________
From: Mike Ketchum [mailto:mike_ketc...@comcast.net]
Sent: Tuesday, December 01, 2009 3:02 PM
To: Dylan Ebner
Cc: sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] Cisco router as PSTN Gateway
Works great, just add as an unmanaged gateway and build a few dial-peers
in the router.
Dylan Ebner wrote:
Has anyone ever used a Cisco router with a VWIC as the PSTN gateway? I
have a lot of cisco equipment here and it would be nice to use that
instead of buying an audiocodes or other gateway. I know the Asterisk
guys have done it, just wondering if it is compatible with SIPX?
Thanks
Dylan Ebner, Network Engineer
Consulting Radiologists, Ltd.
1221 Nicollet Mall, Minneapolis, MN 55403
ph. 612.573.2236 fax. 612.573.2250
dylan.eb...@crlmed.com
www.consultingradiologists.com <http://www.consultingradiologists.com/>
________________________________
_______________________________________________
sipx-users mailing list sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
_______________________________________________
sipx-users mailing list sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
--
Staffan Kerker
mail/sip/xmpp: staf...@kerker.se
"Don't get involved in politics man, just play the gig..." /Sgt Floyd,
Electric Mayhem Band
________________________________
_______________________________________________
sipx-users mailing list sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
--
Staffan Kerker
mail/sip/xmpp: staf...@kerker.se
"There is absolutely no money above the 5th fret..." /Donald "Duck" Dunn
_______________________________________________
sipx-users mailing list sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
