>From the log it almost looks to me like sipXbridge is getting confused about the remote teleworker IP address, but Internet Dialing is setup properly with the correct subnets. My remote teleworker subnet happens to be 172.16.1.x/24 and the subnet that the internal subnet that they sipX system is on is 172.16.128.0/20. Then it thinks 172.16.1.x (my remote pc's internal IP address) is supposed to be an ITSP account.
For what it's worth, I see something similar if I try to do a URL dial to another sipx system... Mike From: [email protected] [mailto:[email protected]] On Behalf Of Picher, Michael Sent: Thursday, December 31, 2009 8:10 AM To: [email protected] Subject: [sipx-users] config problem or sipxbridge problem? Not sure if this is something with my config or sipXbridge. Trying to call remote worker to remote worker that are connected in via sipXbridge. Remote users register no problem, can make outbound calls, can call other phones local to the PBX. If I try to call out to the extensions however it goes right to VM. This happens from any other extension on the system or from an inbound call on sipXbridge. This system is running 4.0.4 installed from ISO as 4.0.2 and upgraded. Attached relevant log and change sip domain to sipdomain.org Thanks, Mike
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
