The 'Enable Internet Calling' setting does break remote users if sipXbridge is used as the SBC.
If you enable the 'Enable Internet Calling' setting remote users show as not being behind NAT. If you disable that setting the NAT works properly and the remote users are correctly identified as being behind a NAT'd device. If enabled the remote user can register and make calls but can not receive calls (call goes directly to voicemail). The line I pointed out earlier in the sipXbridge logs also complains about an invalid ITSP. Disabling 'Enable Internet Calling' resolves this issue. Mike -----Original Message----- From: Scott Lawrence [mailto:[email protected]] Sent: Friday, January 01, 2010 7:14 AM To: Tony Graziano Cc: Picher, Michael; Scott Lawrence; [email protected] Subject: Re: [sipx-users] config problem or sipxbridge problem? On Thu, 2009-12-31 at 17:42 -0500, Tony Graziano wrote: > After thinking about this... If you only have one sbc and it is sipxbridge, > this should not be not-choosable by your superadmin. I think if it breaks > remote users it should be discussed, especially if you need to choose it > with another SBC. I don't believe that it does break remote users and would want very careful documentation of how it does before we open an issue on it. Help text can always be improved - feel free to suggest text. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
