I think the fiewall is not the issue. It's more likely an issue with call forking and how you are configuring your inbound calls. Something is systemically wrong within sipXecs as it relates to the way your have configured hunt groups and queues. Another firewall and config will not assist you in resolving this.
Identify the following: Who is your ITSP or gateway type? (answers should be an audiocodes modell xxx with POTS/PRI or ITSP xyz coming through sipxbridge) What model phone (include firmware and bootrom versions)? What lines you are configuring separately for hunt groups? (explain ONE hunt group you are having a problem with and describe EXACTLY how it is configured) On Sat, Jan 2, 2010 at 6:33 PM, Chris Rawlings <cm.rawli...@gmail.com>wrote: > this is driving me nuts... this does this with every phone system i have > installed using SipX. i can not be the only person that is having this > issue... > > just setup Vyatta.. port forwarded everything... setup masquerading... same > issue. > > Basically when i call into the system.. and hang up before the call is > answered the call doesn't drop and the phones keep ringing. Doesn't matter > if its a Queue or Hunt Group. > > i don't know anymore > > On Jan 2, 2010, at 6:08 PM, Tony Graziano wrote: > > The link I've already sent you has a downloadable configuartion file. From > there you can peruse it with the pfsense gui. > > On Sat, Jan 2, 2010 at 6:05 PM, Chris Rawlings <cm.rawli...@gmail.com>wrote: > >> This is the other thread that i am reffering to from my last post >> >> please if anyone has any ideas i would be all up for them... basically i >> KNOW how to remove MoH from polycom phones that is very easy. i do know how >> to setup NAT properly i believe its the device i am using to NAT with that >> is doing "Port Randomization".... also i do have SIP ALG turned off. i am >> currently using Untangle for firewalling.. if someone could tell me how to >> setup pfSense not with a link but what options need to be turned on or off. >> also how to setup the NAT.. should it be 1:1 ? >> >> also as of now i have vyatta up and running but am testing things out >> right now. >> >> >> On Fri, Dec 25, 2009 at 7:03 PM, Tony Graziano < >> tgrazi...@myitdepartment.net> wrote: >> >>> I might be repeating myself... >>> >>> Polycom firmware 3.1.3, pfsense 1.2.3 and MOH disabled on the phones but >>> not >>> on sipxbridge. Always works. >>> >>> Here's the pfsense howto... >>> http://blog.myitdepartment.net/?p=37 >>> >>> You will also find a fairly easy to follow for bandwidth.com and >>> siptrunking. Many, many have followed these without issue. >>> ============================ >>> Tony Graziano, Manager >>> Telephone: 434.984.8430 >>> Fax: 434.984.8431 >>> >>> Email: tgrazi...@myitdepartment.net >>> >>> LAN/Telephony/Security and Control Systems Helpdesk: >>> Telephone: 434.984.8426 >>> Fax: 434.984.8427 >>> >>> Helpdesk Contract Customers: >>> http://www.myitdepartment.net/gethelp/ >>> >>> ----- Original Message ----- >>> From: sipx-users-boun...@list.sipfoundry.org >>> <sipx-users-boun...@list.sipfoundry.org> >>> To: sipx-users@list.sipfoundry.org <sipx-users@list.sipfoundry.org> >>> Sent: Fri Dec 25 18:54:03 2009 >>> Subject: Re: [sipx-users] Inbound Call not hanging up >>> >>> can you link that how-to for pfSense... i'll give something else another >>> try. >>> >>> at this point tho... the only time this happens is if MoH is being >>> played... >>> if i dial into something that does not have MoH being played it hangs up >>> properly. >>> >>> also it will hang up at the end of the MoH recording right before the >>> recording starts to play again it sees there is no connection from the >>> ITSP >>> and it finally hangs up >>> >>> why would the server not hang up tho if it see's the BYE from the ITSP >>> >>> >>> >>> >>> On Fri, Dec 25, 2009 at 6:12 PM, Tony Graziano < >>> tgrazi...@myitdepartment.net >>> > wrote: >>> >>> > If you follow the how-to I wrote to connect to bandwidth.com using a >>> > pfsense >>> > firewall it will work. If it does not, a trace would be useful. It's >>> more >>> > likely an ISP issue but not something that can be proved without a >>> trace. >>> > >>> > >>> > ============================ >>> > Tony Graziano, Manager >>> > Telephone: 434.984.8430 >>> > Fax: 434.984.8431 >>> > >>> > Email: tgrazi...@myitdepartment.net >>> > >>> > LAN/Telephony/Security and Control Systems Helpdesk: >>> > Telephone: 434.984.8426 >>> > Fax: 434.984.8427 >>> > >>> > Helpdesk Contract Customers: >>> > http://www.myitdepartment.net/gethelp/ >>> > >>> > ----- Original Message ----- >>> > From: sipx-users-boun...@list.sipfoundry.org >>> > <sipx-users-boun...@list.sipfoundry.org> >>> > To: sipx-users@list.sipfoundry.org <sipx-users@list.sipfoundry.org> >>> > Sent: Fri Dec 25 13:37:22 2009 >>> > Subject: Re: [sipx-users] Inbound Call not hanging up >>> > >>> > Standard comcast cable modem in bridged / routed mode >>> > >>> > i don't know if they use transient networks on the Cable side to set >>> this >>> > device up in route mode or if they use a bridged device mode.. but the >>> > comcast modem is setup to do 0 firewalling / NAT. >>> > >>> > i logged into the device and made sure of this >>> > >>> > On Fri, Dec 25, 2009 at 1:25 PM, Scott Barr <stuckb...@gmail.com> >>> wrote: >>> > >>> > > We are using sipX 4.04 with bandwidth.com, as well, after following >>> > Tony's >>> > > most >>> > > helpful guides. We do not experience these issues you have described >>> and >>> > > we >>> > > use >>> > > several different Polycom phone models. >>> > > >>> > > What device is between your firewall and ITSP and is it configured to >>> > > NAT >>> > > as >>> > > well? >>> > > >>> > > -Scott >>> > > >>> > > >>> > > >>> > > >>> > > _______________________________________________ >>> > > sipx-users mailing list sipx-users@list.sipfoundry.org >>> > > List Archive: http://list.sipfoundry.org/archive/sipx-users >>> > > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >>> > > sipXecs IP PBX -- http://www.sipfoundry.org/ >>> > > >>> > >>> > >>> > >>> > -- >>> > Thank You, >>> > Chris Rawlings >>> > IT Consultant >>> > >>> > phone - 610.741.3324 >>> > >>> > VCP RHCE RHCT MCSE >>> > >>> >>> >>> >>> -- >>> Thank You, >>> Chris Rawlings >>> IT Consultant >>> >>> phone - 610.741.3324 >>> >>> VCP RHCE RHCT MCSE >>> >> >> >> >> -- >> Thank You, >> Chris Rawlings >> IT Consultant >> >> phone - 610.741.3324 >> >> VCP RHCE RHCT MCSE >> >> _______________________________________________ >> sipx-users mailing list sipx-users@list.sipfoundry.org >> List Archive: http://list.sipfoundry.org/archive/sipx-users >> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >> sipXecs IP PBX -- http://www.sipfoundry.org/ >> > > > > -- > ====================== > Tony Graziano, Manager > Telephone: 434.984.8430 > Fax: 434.984.8431 > > Email: tgrazi...@myitdepartment.net > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > Fax: 434.984.8427 > > Helpdesk Contract Customers: > http://www.myitdepartment.net/gethelp/ > > Why do mathematicians always confuse Halloween and Christmas? > Because 31 Oct = 25 Dec. > > > > _______________________________________________ > sipx-users mailing list sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431 Email: tgrazi...@myitdepartment.net LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ Why do mathematicians always confuse Halloween and Christmas? Because 31 Oct = 25 Dec.
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
