> >> Who is your ITSP or gateway type? > > i am using Bandwidth.com with the SipX Gateway/SBC > > > What model phone (include firmware and bootrom versions)? > Polycom IP450 > 3.1.3 REV C firmware > > >> What lines you are configuring separately for hunt groups? > > its not only my Hunt Groups that are Fubar and they are only fubar if they > include MoH > > The SBC is setup with a blank extension to drop calls to > The SBC is setup with MoH checked > > Incomming call comes into a Phantom Ext that has an alias set to the DID that > is comming in > That call is then call fowarded to an Auto Attendant > The AA has options on it.. option 1 being the most used one... when option 1 > is pressed that is fowarded to ext 601.. > Ext 601 is a Hunt Group > The hunt group does not allow call forwarding and i have the option set if no > one answers it is fowarded to ~~vm~...@voip.royalshockey.com > The users in the hunt group are setup like so > > 216 ring for 30 seconds > 218 ring "at same time" for 30 seconds > 219 ring "at same time" for 30 seconds > 220 ring "at same time" for 30 seconds > > after 30 seconds it gets forwarded to ~~vm~...@voip.royalshockey.com where > VM's are left > > i NEVER have 1 way audio issues > I DO have the SIP signaling set to 5080 > > Issue is that when someone calls in and hangs up before the call is picked up > the phones in the office keep ringing. I believe if this were to be fixed it > would probably fix my issues with Queues which is another discussion. > > > > > > > On Jan 2, 2010, at 7:08 PM, Tony Graziano wrote: > >> I think the fiewall is not the issue. It's more likely an issue with call >> forking and how you are configuring your inbound calls. Something is >> systemically wrong within sipXecs as it relates to the way your have >> configured hunt groups and queues. Another firewall and config will not >> assist you in resolving this. >> >> Identify the following: >> >> Who is your ITSP or gateway type? (answers should be an audiocodes modell >> xxx with POTS/PRI or ITSP xyz coming through sipxbridge) >> What model phone (include firmware and bootrom versions)? >> What lines you are configuring separately for hunt groups? (explain ONE hunt >> group you are having a problem with and describe EXACTLY how it is >> configured) >> >> >> >> On Sat, Jan 2, 2010 at 6:33 PM, Chris Rawlings <cm.rawli...@gmail.com> wrote: >> this is driving me nuts... this does this with every phone system i have >> installed using SipX. i can not be the only person that is having this >> issue... >> >> just setup Vyatta.. port forwarded everything... setup masquerading... same >> issue. >> >> Basically when i call into the system.. and hang up before the call is >> answered the call doesn't drop and the phones keep ringing. Doesn't matter >> if its a Queue or Hunt Group. >> >> i don't know anymore >> >> On Jan 2, 2010, at 6:08 PM, Tony Graziano wrote: >> >>> The link I've already sent you has a downloadable configuartion file. From >>> there you can peruse it with the pfsense gui. >>> >>> On Sat, Jan 2, 2010 at 6:05 PM, Chris Rawlings <cm.rawli...@gmail.com> >>> wrote: >>> This is the other thread that i am reffering to from my last post >>> >>> please if anyone has any ideas i would be all up for them... basically i >>> KNOW how to remove MoH from polycom phones that is very easy. i do know how >>> to setup NAT properly i believe its the device i am using to NAT with that >>> is doing "Port Randomization".... also i do have SIP ALG turned off. i am >>> currently using Untangle for firewalling.. if someone could tell me how to >>> setup pfSense not with a link but what options need to be turned on or off. >>> also how to setup the NAT.. should it be 1:1 ? >>> >>> also as of now i have vyatta up and running but am testing things out right >>> now. >>> >>> >>> On Fri, Dec 25, 2009 at 7:03 PM, Tony Graziano >>> <tgrazi...@myitdepartment.net> wrote: >>> I might be repeating myself... >>> >>> Polycom firmware 3.1.3, pfsense 1.2.3 and MOH disabled on the phones but not >>> on sipxbridge. Always works. >>> >>> Here's the pfsense howto... >>> http://blog.myitdepartment.net/?p=37 >>> >>> You will also find a fairly easy to follow for bandwidth.com and >>> siptrunking. Many, many have followed these without issue. >>> ============================ >>> Tony Graziano, Manager >>> Telephone: 434.984.8430 >>> Fax: 434.984.8431 >>> >>> Email: tgrazi...@myitdepartment.net >>> >>> LAN/Telephony/Security and Control Systems Helpdesk: >>> Telephone: 434.984.8426 >>> Fax: 434.984.8427 >>> >>> Helpdesk Contract Customers: >>> http://www.myitdepartment.net/gethelp/ >>> >>> ----- Original Message ----- >>> From: sipx-users-boun...@list.sipfoundry.org >>> <sipx-users-boun...@list.sipfoundry.org> >>> To: sipx-users@list.sipfoundry.org <sipx-users@list.sipfoundry.org> >>> Sent: Fri Dec 25 18:54:03 2009 >>> Subject: Re: [sipx-users] Inbound Call not hanging up >>> >>> can you link that how-to for pfSense... i'll give something else another >>> try. >>> >>> at this point tho... the only time this happens is if MoH is being played... >>> if i dial into something that does not have MoH being played it hangs up >>> properly. >>> >>> also it will hang up at the end of the MoH recording right before the >>> recording starts to play again it sees there is no connection from the ITSP >>> and it finally hangs up >>> >>> why would the server not hang up tho if it see's the BYE from the ITSP >>> >>> >>> >>> >>> On Fri, Dec 25, 2009 at 6:12 PM, Tony Graziano <tgrazi...@myitdepartment.net >>> > wrote: >>> >>> > If you follow the how-to I wrote to connect to bandwidth.com using a >>> > pfsense >>> > firewall it will work. If it does not, a trace would be useful. It's more >>> > likely an ISP issue but not something that can be proved without a trace. >>> > >>> > >>> > ============================ >>> > Tony Graziano, Manager >>> > Telephone: 434.984.8430 >>> > Fax: 434.984.8431 >>> > >>> > Email: tgrazi...@myitdepartment.net >>> > >>> > LAN/Telephony/Security and Control Systems Helpdesk: >>> > Telephone: 434.984.8426 >>> > Fax: 434.984.8427 >>> > >>> > Helpdesk Contract Customers: >>> > http://www.myitdepartment.net/gethelp/ >>> > >>> > ----- Original Message ----- >>> > From: sipx-users-boun...@list.sipfoundry.org >>> > <sipx-users-boun...@list.sipfoundry.org> >>> > To: sipx-users@list.sipfoundry.org <sipx-users@list.sipfoundry.org> >>> > Sent: Fri Dec 25 13:37:22 2009 >>> > Subject: Re: [sipx-users] Inbound Call not hanging up >>> > >>> > Standard comcast cable modem in bridged / routed mode >>> > >>> > i don't know if they use transient networks on the Cable side to set this >>> > device up in route mode or if they use a bridged device mode.. but the >>> > comcast modem is setup to do 0 firewalling / NAT. >>> > >>> > i logged into the device and made sure of this >>> > >>> > On Fri, Dec 25, 2009 at 1:25 PM, Scott Barr <stuckb...@gmail.com> wrote: >>> > >>> > > We are using sipX 4.04 with bandwidth.com, as well, after following >>> > Tony's >>> > > most >>> > > helpful guides. We do not experience these issues you have described and >>> > > we >>> > > use >>> > > several different Polycom phone models. >>> > > >>> > > What device is between your firewall and ITSP and is it configured to >>> > > NAT >>> > > as >>> > > well? >>> > > >>> > > -Scott >>> > > >>> > > >>> > > >>> > > >>> > > _______________________________________________ >>> > > sipx-users mailing list sipx-users@list.sipfoundry.org >>> > > List Archive: http://list.sipfoundry.org/archive/sipx-users >>> > > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >>> > > sipXecs IP PBX -- http://www.sipfoundry.org/ >>> > > >>> > >>> > >>> > >>> > -- >>> > Thank You, >>> > Chris Rawlings >>> > IT Consultant >>> > >>> > phone - 610.741.3324 >>> > >>> > VCP RHCE RHCT MCSE >>> > >>> >>> >>> >>> -- >>> Thank You, >>> Chris Rawlings >>> IT Consultant >>> >>> phone - 610.741.3324 >>> >>> VCP RHCE RHCT MCSE >>> >>> >>> >>> -- >>> Thank You, >>> Chris Rawlings >>> IT Consultant >>> >>> phone - 610.741.3324 >>> >>> VCP RHCE RHCT MCSE >>> >>> _______________________________________________ >>> sipx-users mailing list sipx-users@list.sipfoundry.org >>> List Archive: http://list.sipfoundry.org/archive/sipx-users >>> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >>> sipXecs IP PBX -- http://www.sipfoundry.org/ >>> >>> >>> >>> -- >>> ====================== >>> Tony Graziano, Manager >>> Telephone: 434.984.8430 >>> Fax: 434.984.8431 >>> >>> Email: tgrazi...@myitdepartment.net >>> >>> LAN/Telephony/Security and Control Systems Helpdesk: >>> Telephone: 434.984.8426 >>> Fax: 434.984.8427 >>> >>> Helpdesk Contract Customers: >>> http://www.myitdepartment.net/gethelp/ >>> >>> Why do mathematicians always confuse Halloween and Christmas? >>> Because 31 Oct = 25 Dec. >>> >> >> >> _______________________________________________ >> sipx-users mailing list sipx-users@list.sipfoundry.org >> List Archive: http://list.sipfoundry.org/archive/sipx-users >> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >> sipXecs IP PBX -- http://www.sipfoundry.org/ >> >> >> >> -- >> ====================== >> Tony Graziano, Manager >> Telephone: 434.984.8430 >> Fax: 434.984.8431 >> >> Email: tgrazi...@myitdepartment.net >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> Fax: 434.984.8427 >> >> Helpdesk Contract Customers: >> http://www.myitdepartment.net/gethelp/ >> >> Why do mathematicians always confuse Halloween and Christmas? >> Because 31 Oct = 25 Dec. >> >
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
