Calls need to route in to port 5080. To ring to a hunt group, setup a phantom user (just a user that a phone doesn't register to) and use forwarding on that user to direct the call wherever you'd like (and add some scheduling if you want to hit an AA after hours).
Mike > -----Original Message----- > From: sipx-users-boun...@list.sipfoundry.org [mailto:sipx-users- > boun...@list.sipfoundry.org] On Behalf Of Djerk Geurts > Sent: Friday, April 30, 2010 10:23 PM > To: sipx-users@list.sipfoundry.org > Subject: [sipx-users] Call routing for DID from ITSP > > Hi, > > I'm new to sipxecs, upgrading from an old asterisk machine to a > virtualbox vm. So far so good, managed to get the guest additions and > virtio-net going fine. Also internal calling works. > > I have 3 ITSP accounts with 2 ITSP's for 3 DID numbers. I have 3 other > ITSP's for out bound calls. Neither in or out bound calls currently > work. I have attached a siptrace xml file. I'm hoping for some hints > and explanation as to why there's a 302 and a 407 error code in the > trace. > > currently I have extension 201 set up with aliases for the full ENUM > and the userid for that ITSP/DID. It seems to want to route to the > correct extension but the call is never established. > > Eventually I'd like to route the call to a hunt group. Any hints on the > possibilities for this are also most welcome. > > Regards, > Djerk _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
