Same issue. I see the From header as user_caller...@sipx_ip_addr
I want it to use user_called...@itsp Server Address... Can we do that ? -----Original Message----- From: sipx-users-boun...@list.sipfoundry.org [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Ali Nebi Sent: Friday, August 13, 2010 4:52 AM To: Tony Graziano Cc: sipx-users@list.sipfoundry.org Subject: Re: [sipx-users] Caller ID set by users is not showed in other side (sipxecs 4.2.1). Thank you very much for your help. This solved my problem :) I will know it for next time :) On Fri, 2010-08-13 at 06:43 -0400, Tony Graziano wrote: > See if the gateway has default asserted identity checked. If so, uncheck it. > ============================ > Tony Graziano, Manager > Telephone: 434.984.8430 > Fax: 434.984.8431 > > Email: tgrazi...@myitdepartment.net > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > Fax: 434.984.8427 > > Helpdesk Contract Customers: > http://www.myitdepartment.net/gethelp/ > > ----- Original Message ----- > From: Ali Nebi <an...@iguanait.com> > To: Tony Graziano <tgrazi...@myitdepartment.net> > Cc: sipx-users@list.sipfoundry.org <sipx-users@list.sipfoundry.org> > Sent: Fri Aug 13 06:40:34 2010 > Subject: Re: [sipx-users] Caller ID set by users is not showed in other side > (sipxecs 4.2.1). > > Tony, > > i was checking a trace more deeply and i see this. > > When i do a call from user 400, with set caller id 0035966688787 for > 400, to 003595454545, i see following: > > 1. From sipXproxy to sipxbridge the from header looks this way: > From: "Ali Nebi" <sip:0035966688...@mydomain.tld>;tag=zshot > > and this is ok i think. > > 2. From sipxbridge to ITSP the from header looks this way: > > From: "Ali Nebi" > <sip:myusername_in_i...@sip.voicetrading.com>;tag=832786852632511282 > > This is wrong here and this is why my ITSP does not send caller id to > the other side. > > The question is how to put instead of my_username_in_itsp to be my > caller id number? But i suppose that if i do so somehow, then ITSP will > not accept my calls, because it will not know who i am. > > So how to proceed? > > Thanks in advanced! > > > On Thu, 2010-08-12 at 07:20 -0400, Tony Graziano wrote: > > When it suits your schedule, removing and re-creating the gateway might be > > prudent. It will interrupt remote registrations and call via trunks so > > timing would be important. > > ============================ > > Tony Graziano, Manager > > Telephone: 434.984.8430 > > Fax: 434.984.8431 > > > > Email: tgrazi...@myitdepartment.net > > > > LAN/Telephony/Security and Control Systems Helpdesk: > > Telephone: 434.984.8426 > > Fax: 434.984.8427 > > > > Helpdesk Contract Customers: > > http://www.myitdepartment.net/gethelp/ > > > > ----- Original Message ----- > > From: Ali Nebi <an...@iguanait.com> > > To: Tony Graziano <tgrazi...@myitdepartment.net> > > Cc: sipx-users@list.sipfoundry.org <sipx-users@list.sipfoundry.org> > > Sent: Thu Aug 12 06:50:02 2010 > > Subject: Re: [sipx-users] Caller ID set by users is not showed in other > > side > > (sipxecs 4.2.1). > > > > I just tested with the other trunk (telsome) and caller id is shown and > > is ok. It looks that this is an issue only with voicetrading. > > > > On Thu, 2010-08-12 at 06:08 -0400, Tony Graziano wrote: > > > Does it work for any user at all (callerid)? > > > > > > I am running 4.2.1 and don't have that problem. I tried with both > > > counterpath and polycom phones. I tried with both voip.ms and > > > bandwidth.com. > > > > > > Are you using a repo at download.sipfoundry.org? > > > ============================ > > > Tony Graziano, Manager > > > Telephone: 434.984.8430 > > > Fax: 434.984.8431 > > > > > > Email: tgrazi...@myitdepartment.net > > > > > > LAN/Telephony/Security and Control Systems Helpdesk: > > > Telephone: 434.984.8426 > > > Fax: 434.984.8427 > > > > > > Helpdesk Contract Customers: > > > http://www.myitdepartment.net/gethelp/ > > > > > > ----- Original Message ----- > > > From: sipx-users-boun...@list.sipfoundry.org > > > <sipx-users-boun...@list.sipfoundry.org> > > > To: sipx-users@list.sipfoundry.org <sipx-users@list.sipfoundry.org> > > > Sent: Thu Aug 12 03:41:31 2010 > > > Subject: [sipx-users] Caller ID set by users is not showed in other > > > side(sipxecs4.2.1). > > > > > > Hi, > > > > > > on 4.2.1 we have several users that have set specific Caller IDs for > > > their users. The Caller IDs are NOT blocked. > > > > > > In trunk settings we have not set Default Caller IDs and in advanced > > > settings of trunks we have unchecked this option: "User part of INVITE > > > SIP URI is a phone number". We have unchecked this, because our ITSP > > > does not like this and expect to see username in URI. > > > > > > The situation is this. > > > > > > I do external call and phone is ringing on the other side. But phone > > > does not show the number (Caller ID), but it shows "Private Number". For > > > the phone number is hidden and it shows "Private Number". > > > > > > In traces of call i see this header set: > > > > > > P-Asserted-Identity: "Ali" <sip:003491xx...@mydomain.tld> > > > > > > On version 4. > > > It looks that ITSP does not take the data from this header and the > > > number is not showed when we do a call. > > > > > > So how can i solve this problem? > > > > > > Let me know if you need a trace and i will attach it. > > > > > > Thanks in advanced > > > > > > _______________________________________________ > > > sipx-users mailing list > > > sipx-users@list.sipfoundry.org > > > List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/
